Products

AEROSIL® R 208 Coating is a fumed silica after-treated with polydimethylsiloxane.

AP 1465 is an excellent light color and a low viscosity phenalkamine curing agent suitable for epoxy coating primarily for top coat application. The product has rapid cure and film properties at lower temperature and excellent adhesion on concrete, primers, and mid coats. This product is designed primarily for floor topcoat and self leveling applications due to its good hardness, mechanical properties, and gloss and color retention.

Dynasylan® AMEO-T is a blend of primary and secondary aminofunctional silanes. The blend contains more than 90 wt% of 3­ aminopropyltriethoxysilane. Aminofunctional silanes posses a reactive amino group and a hydrolyzable ethoxysilyl group. The dual nature of this reactivity allows Dynasylan® AMEO­T to bind chemically to both inorganic materials (e.g. glass, metals and fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter, a surface modifier and a reactive reagent. Dynasylan® AMEO­T is a yellowish liquid with an amine­like odor. It is soluble in alcohols as well as aliphatic or aromatic hydrocarbons.

Cotin® 227 is a dibutyltin diacetate, a liquid organotin catalyst recommended for the manufacture of silicone and polyurethane systems. It can be used in these primary reactions as well as secondary types such as allophanate and biuret formation.

TEGO® Rad 2500 is radically cross-linkable and imparts slip and defoaming properties to UV inks and coatings. First choice when formulating 'release' coatings and aiming for improvement of mechanical resistance.

VERSAL YELLOW H4G 01 is a pigment used in decorative paints, industrial coatings, and wallcoverings and amp, decorative laminates. It is compatible with plasticized polyvinyl chloride (PVC-P), polyolefins, and nitrocellulose, and is used in plastics and elastomers.

MAINCOTE™ 4950 Resin is an aqueous acrylic emulsion polymer that facilitates the formulation of coatings to less than or equal to 50 g/L VOC for use in light to medium duty maintenance and protective coatings applications and general industrial metal finishing applications. It offers excellent exterior durability and corrosion resistance, and ease of formulation with excellent paint stability. MAINCOTE 4950 Resin offers improved corrosion resistance versus current direct-to-metal (DTM) finish coats formulated below 100 g/L. It also offers good architectural gloss and trim paint properties. Low coalescent demand allows compliance with stringent VOC regulations.

H.B. Fuller® PD-0431 is a carboxylated, surfactant stabilized acrylic emulsion polymer.

Bermocoll® M 30 Q is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll® M 30 Q contains methyl, ethyl and hydroxyethyl substituents giving a unique balance between workability and strength.

AP 5504 is a low viscosity, reactive polyamidoamine hardener for epoxy resins based lacquers and coatings.

Wayncor™ 222 is a white, non-refractive, anti-corrosive pigment used in protective coatings. It is widely considered by the coatings industry to be a standard corrosion inhibitor. It exhibits a high degree of versatility and is compatible with almost all commercially available aqueous and solvent based coatings. The use level will vary depending upon resin system, pigment volume concentration and desired performance parameters, however typical use levels are between 3 - 10% total formula weight.

Ceridust® 8170 M TP is a revolutionary PTFE free agent for powder coatings to create structuring effects in the powder coating formulation.

EMERAL EMR D1250BG is a binder used in coatings, specifically for metallic paints.

Thetawet™ FS-8020EB is an anionic surfactant and wetting agent used in fiber finishes, floor coatings, lacquers, and top coats. It is also used as a polish in industrial additives.

POLYGLYKOL B 01/240 is used in chemical manufacturing, equipment and parts, fluids and lubricants, leather manufacturing, metal manufacturing and finishing, paints and coatings, printing and inks, and textile manufacturing. It is applied in metal processing.