Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Product Code
- MITM16568
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
Applications & Uses
Properties
- Physical Form
- Soluble In
- Note
Bermocoll® M 30 Q is a medium viscosity grade of methyl ethyl hydroxyethyl cellulose.
Regulatory & Compliance
- Quality Standards
Safety & Health
- Safety Precautions
- Bermocoll® M 30 Q is easily dispersed in cold water of pH 7 or less.
- Bermocoll® M 30 Q can form lumps when added to an alkaline liquid.
- To avoid this, it should be added as a ready stock solution, as a slurry in slight acid water or in an organic solvent, or as a dry mix with other powder materials.
- The dissolving time after dispersion is influenced by the water pH.
- Alkaline additives can be used to speed up the dissolving process. At the temperatures above 250°C (480°F), charring of Bermocoll® M 30 Q will occur.
- At high temperatures and in contact with an open flame, Bermocoll® M 30 Q will burn slowly with the characteristics of cellulose.
Principal Information
- Group Principal Number
- S003175
- Principal
Storage & Handling
- Storage Conditions
- In unopened bags, Bermocoll® M 30 Q can be stored for several years.
- In opened bags, the moisture content of Bermocoll® 30 Q will be influenced by the air humidity.
Other
- Appearance
- Whitish powder
- Appearance (SDS)
- powder
- Color (SDS)
- Off-white
- Dust Explosion Class (SDS)
- St2
- Flammability (SDS)
- Combustible solids
- Odor (SDS)
- Odorless
- Other Hazards
- Dust can form an explosive mixture in air
- Oxidizing Properties (SDS)
- Not oxidizing
- Protect from Freezing
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 5.0-7.0 - at 1% solution - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d - Physical Properties
Value Units Test Method / Conditions Particle Size max. 600.0 µm µm at 98 % Viscosity 2500.0-3500.0 mPa.s mPa.s Brookfield LV Viscometer at 20°C, 1% solution - Material Composition
Value Units Test Method / Conditions Salt Content max. 6.0 % % Volatile Content max. 5.0 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 338.0 °F °F DIN EN 15188 Autoignition Temperature (SDS) 752.0 °F °F DIN EN 50281-2-1 Burning Number (SDS) 5.0 - Decomposition Temperature (SDS) min. 212.0 °F °F Deflagration Index (SDS) 200.0-300.0 bar.m/s bar.m/s Lower Flammable Limit (SDS) 30.0 g/m³ g/m³ Minimum Ignition Energy (SDS) min. 10.0 MJ MJ Viscosity (SDS) 2500.0-3500.0 mPa.s mPa.s at 20°C pH 7 at 1% solution. pH (SDS) max. 6.5 - concentration : 0.5%