Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Composite Materials Functions
- Country of Origin
- Function
- Abrasive Agent, Adhesion Promoter, Filler, Sizing Agent, Surface Modifier
- Industrial Additives Functions
- Plastics & Elastomers Functions
- Product Code
- MITM04130
- RTU Product Type
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Industrial Additives Features
- Labeling Claims
- Materials Features
Applications & Uses
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Industrial Additives End Use
- Markets
- Applications
- Product Applications
Dynasylan® AMEOT is an essential constituent in many areas of application.
Examples are:
- Primers: for glass and metal
- Mineral fiber insulating materials, abrasives: as an additive to phenolic resin binders
- Foundry resins: as an additive to phenolic, furan and melamine resins
- Sealants and adhesives: as a primer or additive
- Mineralfilled polymers (composites) or HFFR cables: for pretreatment of fillers and pigments or as an additive
- Paints and coatings: as an additive and primer for improving adhesion to the substrate.
The most important effects which can be achieved using Dynasylan® AMEOT are: improvement of product properties, such as
- Flexural strength, tensile strength, impact strength and modulus of elasticity
- Moisture and corrosion resistance
- Electrical properties, for example dielectric constant, volume resistivity improvement in processing properties, such as
- Adhesion
- Filler dispersion
- Rheological behaviour: reduction in viscosity, Newtonian behavior
- Higher filler loading
- Processing Information
- Dynasylan® AMEO-T may be used as an approximately 0.510 percent solution as a constituent of aqueous sizes, neat, or added to the polymer as an additive.
Properties
- Physical Form
- Soluble In
- Product Reactivity
- In the presence of water, the ethoxy groups of Dynasylan® AMEO-T hydrolyze to produce ethanol and reactive silanol groups, which can bond to a variety of inorganic substrates.
- The organophilic amino group can react with a suitable polymer.
- The hydrolysis of Dynasylan® AMEO-T takes place autocatalytically.
- Aqueous solutions of Dynasylan® AMEO-T might show a certain turbidity. In these cases the hydrolysis is preferably carried out at pH 3.
- Examples of suitable inorganic substrates are glass, glass fibers, glass wool, mineral wool, silicic acid, quartz, sand, cristobalite, wollastonite and mica as well as aluminium hydroxide, kaolin, talc, other silicate fillers, metal oxides and metals.
- Dynasylan® AMEO-T may be used with such polymers as phenolic, furan and melamine resins, polyurethanes, PA, PBT, PC, EVA, modified PP, PVB, PVAC, PVC, acrylates and silicone.
- Dynasylan® AMEO-T can undergo reactions with ketone or ester solvents. The silane or silanized substrates can react with carbon dioxide to form the corresponding carbonates and/or carbamates.
Packaging & Availability
Principal Information
- Group Principal Number
- S000006
- Principal
Storage & Handling
- Storage Conditions
- In the unopened container Dynasylan® AMEO-T has a shelf life of at least one year.
Other
- Appearance
- Yellowish liquid
- Color (SDS)
- Yellow
- IATA/ICAO Emergency Response Guide
- 8L
- IATA/ICAO Proper Shipping Name
- Corrosive liquid, basic, organic, N.O.S. (3-aminopropyl-triethoxysilane)
- IATA/ICAO UN Number
- UN 3267
- IMO/IMDG EmS Fire
- F - A
- IMO/IMDG EmS Spill
- S - B
- IMO/IMDG Proper Shipping Name
- Corrosive liquid, basic, organic, N.O.S. (3-aminopropyl-triethoxysilane)
- IMO/IMDG UN Number
- UN 3267
- Immiscible In (SDS)
- Water
- Item Number
- Odor
- Amine like odor
- Odor (SDS)
- Amine like
- Other Hazards
- Hazard(s) not otherwise classified (HNOC): None
- Temperature Control
- No
- USA/DOT Emergency Response Guide Number
- 153
- USA/DOT Proper Shipping Name
- Corrosive liquid, basic, organic, N.O.S. (3-aminopropyl-triethoxysilane)
- USA/DOT UN Number
- UN 3267
- Optical Properties
Value Units Test Method / Conditions Refractive Index 1.425 - DIN 51423 nD20 - Physical Properties
Value Units Test Method / Conditions Boiling Point min. 68.0 °C °C DIN 51356 at 0.4kPa Density 0.95 g/cm³ g/cm³ DIN 51757 at 20°C Flash Point 93.0 °C °C DIN 51758 Viscosity 2.0 mPa.s mPa.s DIN 53015 at 20°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 80.0-90.0 °C °C Pensky-Martens Closed Cup (PMCC) Boiling Point (SDS) 80.0-90.0 °C °C EN ISO 2719 Density (SDS) 0.95 g/cm³ g/cm³ DIN 51757 at 20°C Ignition Temperature (SDS) 265.0 °C °C DIN 51794 Lower Explosion Limit (SDS) 0.8 % % Upper Explosion Limit (SDS) 4.5 %(V/V) %(V/V) Viscosity (SDS) 2.0 mPa.s mPa.s DIN 53015 at 20°C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 1.0 yr yr