Products

Dynasylan® HYDROSIL 2909 functions as a surface modifier, coupling agent, and crosslinking agent in industrial additives.

CRAYVALLAC® LA-150 is a new pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to solvent based systems.CRAYVALLAC® LA-150 is a post-addition rheology modifier composed of a modified urea dissolved in DMSO. When added to the final system, the DMSO is diluted and the modified urea crystallizes out as very fine fibres which build into a three-dimensional interacting network. It is this network that gives rise to the system’s shear thinning rheology and time dependent viscosity recovery. The result is excellent control of sedimentation combined with ease of application. Immediately following application, where low shear conditions again predominate, the system’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependency is known as thixotropy and enables the final system to attain very good levelling.

TEGO® Wet 240 is a highly active siloxane-based substrate wetting additive. It shows outstanding fine atomization in spray applications. It is very compatible and recoatable.

EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer. EBECRYL® P115 can be used with EBECRYL® P39 (1) (a polymeric benzophenone derivative) to produce UV cured coatings and inks with low residual odor.

RHOPLEX® PR-409AF is an aqueous, all-acrylic binder designed for premium performance in universal stain blocking primers and primer-less paints. It’s distinct molecular weight distribution, combined with ambient crosslinking enables excellent adhesion to a variety of substrates without the use of APEO surfactants1. Coatings based on RHOPLEX® PR-409AF provide robust adhesion to metals, wood, masonry, cementitious, ceramic, alkyd and especially aged chalky substrates. The great compatibility of RHOPLEX® PR-409AF with zinc oxide can further enhance the exceptional stain blocking (household and tannin) and efflorescence of primers made with it. This binder further affords step out performance with the unusual combination of superior crack resistance combined with excellent dirt pick up resistance.

D.E.H.® 85 is a unmodified, phenolic hardener.

CYMEL® U-80 Resin is a highly n-butylated urea resin supplied at >96% solids content. Its high extent of alkylation and hydrophobic nature make the CYMEL® U-80 Resin suitable for a wide range of coating applications, including high solids primers for automotive, general industrial, and container coatings, providing improved film flexibility and adhesion to various substrates. CYMEL® U-80 resin is insoluble in water but can be used in emulsified form as a crosslinking agent in water-dispersible alkyds, acrylic resins, and in emulsion systems.

Flexricin® P-4 is a clear, low viscosity, low temperature plasticizer for many resin systems in the production of low durometer stock. It functions as a general purpose plasticizer and processing aid, and imparts exceptional cold crack resistance to flexible nitrocellulose lacquers.

D.E.H.® 82 is a Phenolic hardener containing 3.5% curing accelerator and 2.5% flow modifier.

SILIKOPHEN® AC 900 is a reactive methyl phenyl silicone resin

TAMOL® 2002 is a dispersant used in industrial additives, binders, and textiles.

ALBIDUR® 1223 shows the highest performance in flexibilizing SILIKOPON® EF and SILIKOPON® ED without influencing chemical resistance properties, gloss, or transparency of the cured film.