Products

SOCER BRAZIL COL 1440 is 100% Elliottii Rosin obtained by distillllation of crude gum / pine oleoresin collected from Pinus trees (live).

EBECRYL® 3700-25R is the bisphenol A epoxy diacrylate, EBECRYL® 3700, diluted 25% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 3700-25R exhibits low odor and fast cure response. Films of EBECRYL® 3700-25R cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, high surface hardness, and the superior chemical resistance typical of an epoxy resin.

40 Oil - Polymerized Castor Oil at the double bond yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks, and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil, and solvent resistance.

Flexricin® P-6 is a highly efficient plasticizer for nitrocellulose lacquers, vinyl resins and many other natural and synthetic resins. It provides good permanence and can be used in conjunction with the polymerized castor oils.

EBECRYL® 4883 is an aliphatic urethane diacrylate diluted 10% by weight with the reactive diluent N-vinyl-2-pyrrolidone (N-VP) . Ultraviolet light (UV) or electron beam (EB) cured films of EBECRYL 4833 exhibit excellent toughness, flexibility, and adhesion to various plastics, and are resistant to yellowing.

Dynasylan® 2101 is a 100% active ureidosilane. It contains no organic tin compounds and no toxic carbamates above the declaration limit.

Ceridust® 9615 A is a micronized wax compound, based on polyethylene wax and amide wax.

Bermocoll® Prime 2500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance, and superior colour stability. It improves the consistency, the stability, and the water retention of water based paints.

NGT 200 L is a low viscosity, light colour renewable natural phenolic compounds; it is a mono hydroxyl phenol having a long hydrocarbon chain at meta position which makes it a very versatile material having different uses.

PTMEG-2000 is used in DIY consumer and industrial and assembly adhesives. It is compatible with polyamide, polyesters, and polyurethane substrates.

EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two-component dual cure systems for coatings on wood, plastic, and metal.

EMERAL EMR-D8110 is a silica coated aluminium paste with Methoxypropanol solvent.

EBECRYL® 1859 is a high molecular weight acrylate especially developed for high speed UV, HUV, UV LED, and EB cured offset lithographic inks. EBECRYL® 1859 exhibits excellent lithographic behavior, very good pigment wetting and high reactivity.