Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM15407
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL® 1859 is characterized by:
- Medium viscosity (easy handling)
- Low odor
- Excellent pigment wetting (also for carbon black)
- High reactivity
- Excellent ink water balance
Good compatibility with other acrylatesUV/EB offset lithographic inks based on EBECRYL® 1859 are characterized by the following performance properties:
- Good flow
- High gloss
- Stable ink water emulsion ensuring constant ink transfer
- Reduced misting
- Reduced dot gain
- High cure speed
The actual properties of UV/EB cured products also depend on the selection of the other formulation components, such as reactive diluent(s), additives and photo initiators.
Applications & Uses
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Applications
- EBECRYL® 1859 is recommended for commercial applications using high speed sheetfed offset on paper and board substrates.
- It can also be used in other wet or dry offset inks, and in other applications such as UV/EB flexographic and screen inks.
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container.
- Wash thoroughly after handling. Keep container tightly closed.
- Use with adequate ventilation.
- Product can develop a very thin white film in container when cold, recommended is to heat the product slightly prior to using in order for the thin white layer to disappear.
Other
- Appearance
- Hazy liquid
- Appearance (SDS)
- Clear viscous liquid
- Color (SDS)
- Light brownish yellow
- IATA/ICAO Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IATA/ICAO Technical name (N.O.S.)
- Acrylated esters
- IATA/ICAO UN Number
- UN3082
- IMO/IMDG Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IMO/IMDG Technical name (N.O.S.)
- Acrylated esters
- IMO/IMDG UN Number
- UN3082
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Mild organic
- Other Hazards
- Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates, Polymerization may occur from excessive heat , contamination or exposure to direct sunlight .
- Protect from Freezing
- Yes
- TDG Canada Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- TDG Canada Technical name (N.O.S.)
- Acrylated esters
- TDG Canada UN Number
- UN3082
- Temperature Control
- Yes
- USA/DOT Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- USA/DOT Technical name (N.O.S.)
- Acrylate ester
- USA/DOT UN Number
- UN3082
- Chemical Properties
Value Units Test Method / Conditions Acid Value max. 6.0 mg KOH/g mg KOH/g - Material Composition
Value Units Test Method / Conditions Residual Solvent Content max. 10.0 ppm ppm Toluene - Physical Properties
Value Units Test Method / Conditions Density 1.1 g/cm³ g/cm³ At 25°C Storage Temperature 39.2-104.0 °F °F Viscosity 36000.0 - at 25°C, 20/sec Viscosity 850.0-1250.0 - At 60°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 1.11 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C Storage Temperature (SDS) 4.0-40.0 °C °C Vapor Pressure (SDS) max. 1.33 - at 20°C Volatile Content (SDS) max. 0.5 % % - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 -