Products

CARPOL® EDAP-770 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 770. This tetrol is polymerized solely with propylene oxide and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-770 can also be used as a curative for most C.A.S.E. applications.

Toyal TCR6060A is used in paints and coatings markets and functions as a pigment. It features circulation stability and non-leafing properties.

Corrostain™ 228 features a unique pigment chemistry which combines the dual functionality of Corrosion Inhibition and Tannin Stain Inhibition. This dual functionality aids in the reduction of raw material inventories and also provides effective inhibitor formulations. It is designed to provide good stability and performance in both solvent and water based systems. Typical use level is between 2 - 6% based upon total formula weight.

Silcolapse® 411 is a compound containing polydimethylsiloxane oil and a mineral filler in colloidal dispersion. It is intended mainly for treating anhydrous media, but also aqueous media, in numerous industries (oil, chemicals, metallurgy, etc.). Its low viscosity and its efficiency in alkaline media are of particular interest. Silcolapse® 411 is intended for industrial use only, and should not be used in the manufacture of foodstuffs, cosmetics or pharmaceutical products.

POLYCO™ 3103NP Emulsion Vinyl Acrylic Copolymer offers a good balance of properties for many paper and paperboard applications. The copolymer has excellent strength properties for offset printing, enhanced optical coverage for low brightness base stock and excellent glueability properties. Recommended for many paperboard applications requiring a balance of strength, printability, enhanced optical coverage and glueability, POLYCO™ 3103NP Vinyl Acrylic Copolymer is intended to provide the performance of POLYCO™ 3103 Acrylic Emulsion at even better value.

CRAYVALLAC® WS-4700 is a 40% active dispersion of polyethylene wax in isopropanol. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WS-4700 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties.

Bayferrox® 663/3 is an inorganic pigment based on iron compounds, suitable for various pigmentation applications.

TMPEOTA is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. TMPEOTA can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, TMPEOTA exhibits the highest reactivity and the greatest viscosity reduction of oligomers.

MKOREZ® MK-100 is made from highly purified monomers such as styrene and/or alpha methyl styrene. This pureness of raw materiaals can make the resin has water white color with high aromaticity than that of conventional hydrogenated resins at the same time. This has good heat stability and excellent potential as a modifier can control set time and transparency of EVA based hot melt adhesives. This can be also used in other kinds of adhesive like SBCs based hot melts.

EBECRYL® 4100 is an undiluted aliphatic urethane acrylate designed for coatings on wood, cork, furniture, paper, parquet, and film.

CARPOL® PGP-3815 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-3815 has a functionality of two and an average molecular weight of 3800 Da. This diol is polymerized with propylene oxide and then capped with 15% ethylene oxide.

EBECRYL® 4491 is an unsaturated aliphatic urethane acrylate recommended in formulations of ultraviolet (UV) and electron beam (EB)curable coatings. The form supplied is 80% in isobornyl methacrylate.

EBECRYL® 3720-TM20 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 3720-TM20 exhibits fast cure response and light color. Films of EBECRYL 3720-TM20 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss and surface hardness, and excellent chemical resistance.

TEGO® Therm HPG 4000 is a purely mineral product based on silicone dioxide. TEGO® Therm HPG 4000 can be combined with other materials to produce thermal insulation coatings.

EBECRYL® 3203 is a low viscosity modified Bisphenol-A based epoxy acrylate oligomer that provides exceptional pigment wetting properties for black and white inorganic pigments and fillers. EBECRYL® 3203 gives a fast cure response when formulated with other oligomers cured via ultraviolet light (UV) or electron beam (EB). EBECRYL® 3203 is used for the preparation of high pigment loading pigment pastes produced using a 3-roll mill or bead mill.