Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Oligomer, Monomer
- Product Code
- MITM00375
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL® 3203 is characterized by:
- Low viscosity
- Excellent pigment wetting properties
UV/EB curable formulated products containing EBECRYL® 3203 are characterized by:
- Good cure response
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as oligomers, additives and photo initiators.
Applications & Uses
- Cure Method
- Industrial Additives End Use
- Ink & Toner End Applications
- Markets
- Applications
- Product Applications
High loading pigment paste formulations prepared using EBECRYL® 3203 are used in the production of UV/EB curable inks intended for use primarily in flexography, gravure and UV ink-jet. The ability to produce highly loaded pigment pastes allows the ink formulator more latitude by using less pigment paste to achieve a given optical density.
Properties
- Physical Form
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container.
- Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Clear liquid
- Color (SDS)
- Clear pale yellow
- IATA/ICAO Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IATA/ICAO Technical name (N.O.S.)
- Epoxy acrylate
- IATA/ICAO UN Number
- UN3082
- IMO/IMDG Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IMO/IMDG Technical name (N.O.S.)
- Epoxy acrylate
- IMO/IMDG UN Number
- UN3082
- Item Number
- Odor (SDS)
- Ester like
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- Protect from Freezing
- Yes
- TDG Canada Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- TDG Canada Technical name (N.O.S.)
- Epoxy acrylate
- TDG Canada UN Number
- UN3082
- Temperature Control
- Yes
- USA/DOT Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- USA/DOT Technical name (N.O.S.)
- Epoxy acrylate
- USA/DOT UN Number
- UN3082
- Chemical Properties
Value Units Test Method / Conditions Acid Value max. 0.35 mg KOH/g mg KOH/g Epoxy Group Content max. 0.1 % % - Optical Properties
Value Units Test Method / Conditions Color Scale max. 2.0 Gardner Gardner Gardner Color Scale - Physical Properties
Value Units Test Method / Conditions Density 1.15 g/cm³ g/cm³ At 25°C Flash Point min. 100.0 °C °C Setaflash Storage Temperature 39.0-104.0 °F °F Viscosity 950.0 mPa.s mPa.s At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 1.0-1.1 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C Vapor Pressure (SDS) 0.013 hPa hPa at 20°C Volatile Content (SDS) 0.1-0.5 % % - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d