Products

PARALOID™ A-21LV 30% Resin is a very hard methyl methacrylate polymer with enhanced adhesion properties. It is supplied as a 30% solution in a toluene/MEK/butanol solvent system. The polymer is also available in solid grade form. PARALOID™ A-21LV 30% Resin is similar to PARALOID™ A-21LV 30% Resin in characteristics and uses but because of its solvent system, PARALOID™ A-21LV 30% Resin possesses better compatibility with cellulosics, such as nitrocellulose and cellulose acetate butyrate. PARALOID™ A-21LV 30% Resin also will allow a higher solids content at spray viscosity.

EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formulated with EBECRYL® 4513 also demonstrate high chemical and wear resistance and are highly resistant to yellowing.

CYMEL® 1123 Resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes CYMEL® 1123 Resin particularly well suited for can coating applications. While CYMEL® 1123 Resin is insoluble in water, it shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. The poor light resistance properties of benzoguanamine makes CYMEL® 1123 Resin unsuitable for exterior applications.

CYMEL® 323 is a crosslinking agent that offers fast cure, humidity resistance, improved film hardness, and solvent resistance in CASE ingredients.

Citroflex™ A-4 is a low molecular weight citric acid ester partially derived from bio-based raw materials.

Preventol® CMK 40 is a biocide used in building and construction, fluids and lubricants, industrial applications, and industrial and assembly adhesives.

LOTRYL® 24MA02T is a random ethylene-methyl acrylate copolymer.

ORGASOL® 2002 D NAT 1 is a spheroïdal powder of polyamide 12, with 20 um as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing excellent consistency in performance.

PARALOID™ A-101 is a very hard methyl methacrylate polymer resin is recommended for clear coatings on vinyl, metal, and wood; gravure printing inks; plastisol primers; and barrier coatings for plastic. PARALOID A-101 has excellent adhesion to plastic; is fast drying; has excellent durability; and is highly resistant to water, grease, salt spray, and gasoline.

EVATANE® 28-05 is a random ethylene-vinyl acetate copolymer.

BAYFAST® YELLOW Y5688 /OF is an Azo complex.

CYMEL® 327 resin is a methylated high imino melamine crosslinker supplied in isobutanol. CYMEL® 327 resin is very reactive and has a tendency towards selfcondensation at normal baking temperatures, providing films with very good hardness, gloss, chemical resistance and outdoor durability. Its major advantage relative to other high imino resins is its potential to lower VOC in high solids formulations.

CYCAT® 4040 is a catalyst that improves cure time in CASE ingredients. It functions as a catalyst in various applications.

LOTADER® 8200 is a random ethylene-ethyl acrylate-maleic anhydride terpolymer. Due to its properties, reactivity, fluidity and compatibility with tackifying resins and waxes, It is suitable as additive for hot melt adhesive formulations and as coupling agent in mineral filled compounds.

Stabaxol® I is an active antihydrolysis agent for polyester polyurethanes produced by hot casting as well as for adhesives based on polyester polyurethane.