Products

Rostabil TTDP-V is a thermal stabilizer from the phosphate ester chemical family, specifically phosphorous acid, triisotridecyl ester. It is used in plastics and elastomers.

COPRO® SP-463 is used in waterborne adhesive applications and functions as a binder and resin.

CARPOL® GP-5171-60 Polyol is a glycerin-initiated polyether polyol. The resulting material has a nominal functionality of three and an average molecular weight of 5000 Da. This triol is polymerized with propylene oxide and then capped with 71% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include flexible foam, however, CARPOL® GP-5171-60 Polyol may also be included as a component in other urethane products and applications.

TEGO® Cure 100 is a reactive ambient-curing siloxane resin,pre-catalyzed with amines, for the use as hardener

3M™ Boron Nitride Cooling Filler Flakes 200-3 is a engineered to improve thermal conductivity in polymers while maintaining or improving electrical insulation. Their unique properties make these additives suitable for many thermoplastic, elastomer and thermoset resins used in a wide variety of electrical and electronic applications including thermal interface materials (TIM), consumer electronics and automotive applications.

TEGO® Glide 450 provides excellent flow and leveling combined with strong slip properties. It is recoatable and can be used in solvent and waterborne coatings.

CARPOL® PGP-2012-60 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2012-60 has a functionality of two and an average molecular weight of 2000 Da. This diol is polymerized with propylene oxide and then capped with 12% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® PGP-2000.

Altawet 12 is a low foaming nonionic complex phosphate ester surfactant, available as 100% active liquid.

AP 1072 LT is a low viscosity, reactive Phenalkamine adduct hardener solution for epoxy resins based lacquers and coatings.

TEGO® Rad 2650 is a radically cross-linkable release additive, providing utmost slip, strong release, and efficient defoaming properties. Ideal for pigmented inks.

EBECRYL® LED 04 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 04 when combined with an appropriate photo initiator system transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED 04 exhibit a low odor after UV or EB curing. Due to its hydrophobic nature EBECRYL® LED 04 can also be used in offset inks applications as a replacement of aminobenzoate synergists.

AP 5000 is a low viscosity, reactive polyamide hardener solution in isopropyl alcohol for epoxy resins based lacquers and coatings.

ZINC STEARATE GP SF 5895 is a low bulk density, very fine white powder.

Licowax® PE 520 fine grain is a medium-molecular weight, non-polar copolymer wax.

REAFREE® 4762 is a binder and resin used in powder coating applications. It provides excellent flow, good mechanical properties, high gloss, and outdoor durability.