Products

AP 8404 is a curing agent based on a poly(bisphenol A-co-epichlorohydrin) glycidyl end-capped structure. It is primarily used in epoxy systems to promote crosslinking and curing. This ingredient enhances the chemical resistance, mechanical properties, and thermal stability of the cured material. It is suitable for various industrial applications requiring durable and high-performance coatings and adhesives.

3M™ Boron Nitride Cooling Filler Flakes 500-15 is a engineered to improve thermal conductivity in polymers while maintaining or improving electrical insulation. Their unique properties make these additives suitable for many thermoplastic, elastomer and thermoset resins used in a wide variety of electrical and electronic applications including thermal interface materials (TIM), consumer electronics and automotive applications.

HP7622 is a high solids, water-reducible polyester dissolved in glycol ether EB (butoxyethanol). It is soluble in water after neutralization with amine. Stability and solubility in water may be improved with additional glycol ether EB or 2-butanol. It is a very linear polymer and provides excellent flexibility when combined with amino resins in baking finishes.

AP 5689 is low viscosity, modified aliphatic amine adduct hardener for epoxy resins based lacquers coatings.

FORTEGRA® 401 is a specialty polyoxypropylene diamine modified liquid epoxy resin. FORTEGRA® 401 is designed for the use of enhancing the toughness and flexibility for epoxy systems, mainly used in epoxy adhesives and coatings products. With improved toughness and flexibility, the adhesives products can achieve better drop resistance and impact peeling resistance, as well as perform well on aging tests. While for the applications in coatings, it brings the benefits of improved adhesion and impact resistance. A wide variety of curing agents are available to cure this resin at ambient conditions. Most frequently used curing agents are aliphatic polyamines, polyamides and modified versions of these. Elevated temperature cure is necessary and post-cure required to develop full end properties if anhydride or catalytic curing agents are employed.

TEGO® Phobe 1409 is an amino-siloxane emulsion for the hydrophobization of coating formulations. It reduces the water uptake and generates a water-beading effect, even in paints with high pH value.

PTMEG-3000 is used in DIY consumer and industrial and assembly adhesives. It is compatible with polyamide, polyesters, and polyurethane substrates.

EBECRYL® 9103 is used in radiation-curable coatings. It functions as a monomer and oligomer in CASE ingredients.

Thetawet™ FS-8235 is an anionic surfactant used as an anti-blocking and release agent in architectural paints, lacquers, solventless and high solids coatings, and top coats. It is also used in polishes as an industrial additive. It features excellent block resistance, weatherability, release properties, long open time, and soil resistance.

AP 1465 is an excellent light color and a low viscosity phenalkamine curing agent suitable for epoxy coating primarily for top coat application. The product has rapid cure and film properties at lower temperature and excellent adhesion on concrete, primers, and mid coats. This product is designed primarily for floor topcoat and self leveling applications due to its good hardness, mechanical properties, and gloss and color retention.

Cotin® 227 is a dibutyltin diacetate, a liquid organotin catalyst recommended for the manufacture of silicone and polyurethane systems. It can be used in these primary reactions as well as secondary types such as allophanate and biuret formation.

TEGO® Rad 2500 is radically cross-linkable and imparts slip and defoaming properties to UV inks and coatings. First choice when formulating 'release' coatings and aiming for improvement of mechanical resistance.

VERSAL YELLOW H4G 01 is a pigment used in decorative paints, industrial coatings, and wallcoverings and amp, decorative laminates. It is compatible with plasticized polyvinyl chloride (PVC-P), polyolefins, and nitrocellulose, and is used in plastics and elastomers.

H.B. Fuller® PD-0431 is a carboxylated, surfactant stabilized acrylic emulsion polymer.