Products

VANCRYL® 965 emulsion is a very low glass transition temperature acrylic polymer designed for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. VANCRYL® 965 also has the unusual combined properties of excellent resolubility and fast drying. These properties are needed when converting flexible packaging printing from solvent-based to water-based formulations. VANCRYL® 965 emulsion is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used pigment dispersions. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, alcohols, and waxes. VANCRYL® 965 can be used as the backbone of printing inks and overprint coatings where various COF or slide resistance requirements are needed, from a range of 0.25 to 0.45.

SILIKOPHEN® P80/MPA is a binder and resin used as a resin in industrial additives.

3M™ Boron Nitride Cooling Filler Platelets 012 is a versatile ceramic material offering thermal conductivity, temperature stability, chemical resistance, high reflectivity, light weighting and electrical insulation. The structure of layered hexagonal plates provides outstanding lubricating properties and is non-abrasive to tooling.

AP 5980 LV is a curing agent designed for use in CASE (Coatings, Adhesives, Sealants, and Elastomers) applications. It facilitates the curing process by promoting crosslinking, enhancing the performance characteristics, and increasing the durability of the cured system.

EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. EBECRYL 657 provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, and low misting. It can be blended with epoxy acrylates or EBECRYL 436 or EBECRYL 438 to increase cure speed.

REAFREE® 4703 is a binder and resin used in paints and coatings.

MITM14797 S-21 is a kind of alicyclic epoxy resin, equivalent to ERL4221 resin, giving outstanding performance in UV inks, UV coatings and other fields.

OREVAC® 18341 is a maleic anhydride grafted linear low density polyethylene.

D.E.H.® 58 Epoxy Curing Agent is a low viscosity accelerated aliphatic polyamine curing agent.

GNS GME-338 is a binder and resin used in industrial applications.

SharkDISPersion FX2™ is a binder and resin used in paints and coatings.

Castorcin™ 320 is a 100% solids, castor oil based reactive diluent that is a blend of primary and secondary hydroxyls with a low molecular weight, which gives this multi-functional polyol a high level of reactivity with high hardness and strength.

WANNATE® IT-170BS dissolved Aromatic 100 and n-butyl acetate (2:1), can be used as the hardener component for lightfast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. Based on its high hardness, it is normally mixed with WANNATE® HT series.

D.E.R.® 671-R75 Epoxy Resin Solution is a low molecular weight epoxy resin of the “1-type” in an Aromatic 100 solution. Resin solutions such as this, when formulated with polyamine or polyamide hardeners, form an excellent base for many high quality coatings.