Products

D.E.R.® 3401 is a low viscosity rapidly reacting bisphenol a/f epoxy resin designed for fast-curing coatings, adhesives, and mortars.

CARPOL® PGP-2012 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2012 has a functionality of two and an average molecular weight of 2000 Da. This diol is polymerized with propylene oxide and then capped with 12% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® PGP-2000.

Sand Texture Modular S-01 is RandD by our own company, so it is brand new and innovative composite materials which are easy to operate and could be mastered quickly during production. It is different from traditional texture powder coating’s production process and preparation design. Sand Texture Modular S-01 could replace texture additive, wax, and parts of polyester resin in traditional texture powder coating formula, lowering the production cost. The cost could also be adjusted according to performance and the property you want to get. All the physical and chemical properties are improved, especially for film hardness, which could be improved to 3-8H (pencil hardness).

EBECRYL® 8811 is used in radiation-curable coatings and functions as a binder and resin in CASE ingredients.

EBECRYL® 8409 is a low viscosity aliphatic urethane diacrylate. Films of EBECRYL® 8409 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible with EBECRYL® 8409. Note that EBECRYL® 8409 typically develops a semi-crystalline aspect upon storage.

3M™ Boron Nitride Cooling Filler Platelets 006 is a versatile ceramic material offering thermal conductivity, temperature stability, chemical resistance, high reflectivity, lightweighting and electrical insulation. The structure of layered hexagonal plates provides outstanding lubricating properties and is non-abrasive to tooling.

CYMEL® 659E is a benzoguanamine-based chemical used in crosslinking applications.

TRIGLYCIDYL ISOCYANURATE JF-77B is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance,weather resistance,adhesive and high temperature performance.

EVATANE® 28-800 is a random ethylene-vinyl acetate copolymer.

Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colorless, nearly odorless low ­viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE).

Foral® 105 resin is the pentaerythritol ester of highly hydrogenated gum rosin. A pale thermoplastic resin, it offers advantages as a tackifier or modifier in various adhesive and coating compositions. Foral® 105 resin exhibits outstanding resistance to oxidation and to discoloration caused by heat and ageing. It has a substantially higher softening point than glycerol rosin esters, and is therefore recommended where a harder resin may be desirable.

EBECRYL® 645 functions as a binder and resin in CASE ingredients and is compatible with wood substrates.

K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that was created to lower the VOC content of a coating more than other K-FLEX® 500P plasticizers. It was specifically designed for the coatings industry where very low VOC content is required or other application areas where low VOC content is critical.

CRAYVALLAC® 60X is used in epoxies (EP) and vinyls. It is applied in anti-fouling coatings, chlorinated rubber coatings, primers, and solventborne coatings. The product provides anticaking, recoatability, and sag resistance.