Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM16237
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL® 8409 is characterized by:
- Low viscosity for handling ease
- Light color
UV/EB cured products based on EBECRYL® 8409 are characterized by the following performance properties:
- Toughness
- Good flexibility
- Exterior durability
- Non-yellowing
- Excellent adhesion to difficult surfaces
The actual properties of UV/EB cured products also depend on the selection of the other formulation components, such as reactive diluent(s), additives and photo initiators.
Applications & Uses
- Compatible Substrates & Surfaces
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Applications
Formulated UV/EB curable products containing EBECRYL® 8409 may be applied via direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, air knife, curtain, immersion and spin coating methods, as well as flexographic and screen printing. EBECRYL® 8409 is recommended for use in:
- Coatings for wood
- Coatings for plastics
- Flexographic inks
- Screen inks
- Exterior durable coatings
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Safety & Health
- Safety Precautions
- Although EBECRYL® 853 is not classified as irritant, it could be used in combination with other components that are eye and skin irritant and have the potential to cause sensitisation or other allergic responses.
- Therefore appropriate precautions should be taken to avoid eye and skin contact and to avoid inhalation of the aerosols or vapors.
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
- Upon storage, EBECRYL® 8409 may show signs of crystallization. This crystallization can be removed by heating containers of EBECRYL® 8409 to a uniform temperature of 60°C.
- Ovens or hotboxes are recommended methods of heating. Heating tapes should not be used. In typical formulations, EBECRYL® 8409 does not exhibit signs of crystallization.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Clear to slightly hazy liquid
- Color (SDS)
- Clear colorless to light straw
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Acrylate
- Other Hazards
- Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates, Polymerization may occur from excessive heat , contamination or exposure to direct sunlight .
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 1.0 Gardner Gardner Color Scale - Mechanical Properties
Value Units Test Method / Conditions Elongation 52.0 % at break, UV cured 125 μm thick films Tensile Modulus 61000.0 psi UV cured 125 μm thick films Tensile Strength 3300.0 psi UV cured 125 μm thick films - Physical Properties
Value Units Test Method / Conditions Density 1.16 g/cm³ Glass Transition Temperature (Tg) 36.0 °C Storage Temperature 39.0-104.0 °F Viscosity 650.0-950.0 mPa.s At 60°C Viscosity 450.0-650.0 mPa.s at 65.5°C - Material Composition
Value Units Test Method / Conditions Solid Content 100.0 %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C Density (SDS) 1.13 g/cm³ Flash Point (SDS) 220.0 °C Cleveland Open Cup Vapor Pressure (SDS) 0.013 hPa at 20°C Volatile Content (SDS) max. 0.5 %