Products

MAINCOTE™ HG-31 is a binder and resin classified under chemical mixtures and blends.

CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post addition to solvent-based low polarity coating systems, it provides a very simple and direct mean of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. It is a softer version than CRAYVALLAC® PA3 WDA 20 with enhanced ease of incorporation. It is also a very cost efficient alternative to organoclays. The shear-thinning characteristic provides a very high viscosity under the low shear rates and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling.

EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. EBECRYL® LEO 10502 is recommended for use in low odor and low migrating UV/EB curable overprint varnishes (OPV’s) and inks.

WANNATE® HT-100 is a solvent free aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

TEGO® Phobe 1409 is an amino-siloxane emulsion for the hydrophobization of coating formulations. It reduces the water uptake and generates a water-beading effect, even in paints with high pH value.

PTMEG-3000 is used in DIY consumer and industrial and assembly adhesives. It is compatible with polyamide, polyesters, and polyurethane substrates.

EBECRYL® 9103 is used in radiation-curable coatings. It functions as a monomer and oligomer in CASE ingredients.

Thetawet™ FS-8235 is an anionic surfactant used as an anti-blocking and release agent in architectural paints, lacquers, solventless and high solids coatings, and top coats. It is also used in polishes as an industrial additive. It features excellent block resistance, weatherability, release properties, long open time, and soil resistance.

AEROSIL® R 208 Coating is a fumed silica after-treated with polydimethylsiloxane.

AP 1465 is an excellent light color and a low viscosity phenalkamine curing agent suitable for epoxy coating primarily for top coat application. The product has rapid cure and film properties at lower temperature and excellent adhesion on concrete, primers, and mid coats. This product is designed primarily for floor topcoat and self leveling applications due to its good hardness, mechanical properties, and gloss and color retention.

Cotin® 227 is a dibutyltin diacetate, a liquid organotin catalyst recommended for the manufacture of silicone and polyurethane systems. It can be used in these primary reactions as well as secondary types such as allophanate and biuret formation.

KRONOS® 2310 has outstanding optical properties and very high weather resistance in coatings.

VERSAL YELLOW H4G 01 is a pigment used in decorative paints, industrial coatings, and wallcoverings and amp, decorative laminates. It is compatible with plasticized polyvinyl chloride (PVC-P), polyolefins, and nitrocellulose, and is used in plastics and elastomers.

AP 5504 is a low viscosity, reactive polyamidoamine hardener for epoxy resins based lacquers and coatings.