Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Oligomer, Monomer
- Product Code
- MITM00469
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL® LEO 10502 is characterized by:
- Low viscosity
- Low odor
- High cure response
UV/EB cured products based on EBECRYL® LEO 10502 are characterized by the following performance properties:
- Good hardness
- Good solvent resistance
- High gloss
- Low extractables
- Low odor
- Low migration
The properties of UV/EB cured products also depend on the choice of the other formulation components, such as reactive diluent(s), additives and photoinitiators.
Applications & Uses
- Coating End Applications
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Applications
EBECRYL® LEO 10502 is recommended as the reactive oligomer for low extractable, low odor overprint varnishes and flexographic inks for indirect food packaging and related applications. It is also suitable for screen and gravure application.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage and Handling Conditions
Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Clear viscous liquid
- Color (SDS)
- Dark yellow
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Mild organic
- Other Hazards
- Polymerization may occur from excessive heat ,contamination or exposure to direct sunlight , Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates.
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 2.0 Gardner Gardner Color Scale - Chemical Properties
Value Units Test Method / Conditions Acid Value 5.0 mg KOH/g Hydroxyl Value 10.0 mg KOH/g - Physical Properties
Value Units Test Method / Conditions Density 1.15 g/mL At 25°C Molecular Weight 760.0 g/mol Viscosity 145.0-220.0 mPa.s At 25°C - Material Composition
Value Units Test Method / Conditions Residual Solvent Content max. 10.0 ppm - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C Density (SDS) 1.15 g/cm³ Flash Point (SDS) min. 100.0 °C SetaFlash Closed Cup Vapor Pressure (SDS) max. 1.33 hPa at 20°C