Products

AEROSIL® R 972 is a fumed silica aftertreated with DDS (Dimethyldichlorosilane)

REAFREE® 4763-S is a binder and resin used in coil coating and powder coating applications. It offers excellent flow, good mechanical properties, high gloss, high reactivity, outdoor durability, and reduced blooming.

CARPOL® PGP-4025-60 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000. This diol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart Carpol® PGP-4000. Main applications include C.A.S.E., however, Carpol® PGP-4025 may also be included as a component in other urethane products and formulations.

Preventol® A 12-TK 50 is for the manufacture of aqueous and solvent formulations for preservation of wood composites, wood in above ground and in-ground applications, leather, films, glues, adhesives, and metalworking fluids.

Paricin® 220 is N-(2-hydroxyethyl)-12-hydroxy- stearamide. It is a high melting point wax like material that has broad compatibility with natural and synthetic waxes, resins and polymers to provide excellent slip and lubricating properties.

TEDA-L33E is a chemical mixture and blend used as a catalyst in industrial additives.

SURFYNOL® 355 is a substrate wetting agent with global food contact compliances. It is suitablefor waterborne coatings and inks.

D.E.R.® 542 is a solid epoxy resin of the tetrabromobisphenol-A epichlorohydrin type.D.E.R.® 542 is a solid, brominated epoxy resin designed for use where maximum bromine is needed to offset large ratios of hardener or non-brominated resin. The improved purity of D.E.R.® 542 makes it especially suitable for electronic related applications where maximum performance and reliability are desired.

Dynasylan® PTEO an alkyltrialkoxysilane is important component in sol­gel systems. Dynasylan® PTEO is a colorless, low­viscosity liquid. Dynasylan® PTEO is regarded as trifunctional since all three alkoxy groups can hydrolyze. Additionally Dynasylan® PTEO contains a propyl group that adds a hydrophobic character to the coatings. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (­Si­O­Si­). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

TEGO® Phobe 1409 is an amino-siloxane emulsion for the hydrophobization of coating formulations. It reduces the water uptake and generates a water-beading effect, even in paints with high pH value.

Thetawet™ FS-8235 is an anionic surfactant used as an anti-blocking and release agent in architectural paints, lacquers, solventless and high solids coatings, and top coats. It is also used in polishes as an industrial additive. It features excellent block resistance, weatherability, release properties, long open time, and soil resistance.

Dynasylan® AMEO-T is a blend of primary and secondary aminofunctional silanes. The blend contains more than 90 wt% of 3­ aminopropyltriethoxysilane. Aminofunctional silanes posses a reactive amino group and a hydrolyzable ethoxysilyl group. The dual nature of this reactivity allows Dynasylan® AMEO­T to bind chemically to both inorganic materials (e.g. glass, metals and fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter, a surface modifier and a reactive reagent. Dynasylan® AMEO­T is a yellowish liquid with an amine­like odor. It is soluble in alcohols as well as aliphatic or aromatic hydrocarbons.

Cotin® 227 is a dibutyltin diacetate, a liquid organotin catalyst recommended for the manufacture of silicone and polyurethane systems. It can be used in these primary reactions as well as secondary types such as allophanate and biuret formation.