Products

CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitability for metal coating as its formula is lithium chloride-free. CRAYVALLAC® LA-377 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided.

NuTone® 302 is a US FDA compliant black, that meets regulation 21 CFR 178.3297. It is available in powder form for coating application and suitable for cookware items.

HIKOTACK® P-110S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for ethylene vinyl acetate (EVA) based hot melt adhesive (HMA), water repellent agent, concrete, curing agent and binder for asphalt.

WANNATE® HT-300 is a solvent free aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

AP 5940 is a low viscosity mannich base hardener for epoxy resin based lacquers and coatings.

CYMEL® 385 Resin is a methylated high imino melamine resin with a low degree of alkylation. Being supplied in water, it is recommended as a crosslinking agent for hydroxyl-containing emulsion polymers and other aqueous systems containing hydroxyl or amide functionality. CYMEL® 385 Resin has a high tendency to self-condense and may be used to increase the hardness and resistance properties of thermoplastic waterborne polymers.

HFGEL 120-FX is an organoclay for solvent-based systems of low to medium polarity.

LOTADER® 3430 is a random ethylene-methyl acrylate-maleic anhydride terpolymer. LOTADER® 3430 is a versatile adhesive for extrusion coating or lamination, designed as: Concentrate to be used in dry blend with LDPE. LOTADER® 3430 improves adhesion of LDPE on aluminium foils, metallized or primerized films. Ready for use resin to be used pure. LOTADER® 3430 gives excellent adhesion on substrates likes aluminum foil, metallized plastics, paper, board, PE and some plastic films like BOPP. Coextrusion tie layer for PE/PA in extrusion coating process. LOTADER® 3430 can also be used as a coupling agent for mineral filled compounds such as halogen free flame retardant wires and cables, a compatibiliser for polyamide/polyolefin blends and a modifier for polyamides.

CYMEL® 5010 Resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL® 5010 Resin imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine, CYMEL® 5010 Resin is not suitable for exterior applications.

EBECRYL® 242N is a tin-free aliphatic urethane acrylate diluted in isobornyl acrylate (IBOA).

TEGO® Foamex 11 is a highly efficient, especially low-VOC defoamer emulsion based on polyether siloxane technology. Developed for architectural paints.

CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. CYMEL® U-1054 resin is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, CYMEL® U-1054 provides an excellent balance between adhesion and film flexibility, especially after several cure cycles.

TEGO® Powder Aid D01 is a solid multi functional polymeric additive for powder coatings. It provides pigment wetting, reduced melt viscosity, improved gloss, and leveling.

LOTRYL® BESTPEEL 2407 is a ready-to-use thermoplastic composition designed to make peelable heat seal layers onto various substrates. The base resin is a random ethylene-methyl acrylate copolymer.

CARPOL® GP-700 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E. and flexible foam, however, CARPOL® GP-700 may also be included as a component in other urethane products and formulations.