Products

BONDERITE® S-FN 109 is used in coating applications, specifically as a conductive coating.

D.E.H.® 7009 is a modified polyamine suitable for solvent free primers. It is free of benzyl alcohol, nonylphenol and bisphenol A. It has also a low viscosity and long pot life.

PLYAMUL® CPS-104 is an externally plasticized, hydroxyethyl cellulose stabilized, vinyl acetate homopolymer

BONDERITE® M-MN LUBRITE 2 is a corrosion inhibitor used in 1K (one-component) coatings. It is compatible with iron, metal, and steel substrates, providing high oil absorption, scuff resistance, and preventing metal-to-metal contact. It also offers non-metallic properties for enhanced performance.

ACRYLTAC® SP-405 is a carboxylated acrylic copolymer emulsion. Higher shear and lower tack values compared to SP-400.

CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity).CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

HP7622 is a high solids, water-reducible polyester dissolved in glycol ether EB (butoxyethanol). It is soluble in water after neutralization with amine. Stability and solubility in water may be improved with additional glycol ether EB or 2-butanol. It is a very linear polymer and provides excellent flexibility when combined with amino resins in baking finishes.

AP 5689 is low viscosity, modified aliphatic amine adduct hardener for epoxy resins based lacquers coatings.

FORTEGRA® 401 is a specialty polyoxypropylene diamine modified liquid epoxy resin. FORTEGRA® 401 is designed for the use of enhancing the toughness and flexibility for epoxy systems, mainly used in epoxy adhesives and coatings products. With improved toughness and flexibility, the adhesives products can achieve better drop resistance and impact peeling resistance, as well as perform well on aging tests. While for the applications in coatings, it brings the benefits of improved adhesion and impact resistance. A wide variety of curing agents are available to cure this resin at ambient conditions. Most frequently used curing agents are aliphatic polyamines, polyamides and modified versions of these. Elevated temperature cure is necessary and post-cure required to develop full end properties if anhydride or catalytic curing agents are employed.

CYMEL® 688 is a melamine formaldehyde resin, specifically butyl melamine formaldehyde, used in various industrial applications.

CYMEL® 3745N Resin is a highly methylated melamine crosslinker designed for use in both solvent-borne and waterborne industrial finishes. Its high functionality and low tendency to self-condense promotes excellent formulated stability and results in films with very good hardness development, flexibility, formability, and resistance properties making it suitable for a wide range of coating applications, like can and container coatings, foil coatings, automotive coatings and waterborne formulations.

EBECRYL® LEO 10102 is used in printing inks and functions as a binder and resin in CASE ingredients.