Products

D.E.H.® 80 is a phenolic hardener based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A containing a polyacrylate flow modifier and about 0.7% of a curing accelerator.

CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes CYMEL® UI19-I resin suitable for ambient and low bake industrial wood finishes.

LOTRYL® 17BA07N is a random copolymer of Ethylene and Butyl Acrylate produced by high-pressure radicalar polymerization process.

SURFYNOL® 61 surfactant is a 100% active multifunctional surface active agent. Due to its volatile nature, SURFYNOL® 61 surfactant can evaporate from a system under use conditions and/or heating. Therefore, SURFYNOL® 61 surfactant is useful in applications where residual surface activity or contamination is undesirable, such as silicon wafer and glass cleaning. SURFYNOL® 61 surfactant can provide excellent wetting of polyethylene and polypropylene films. Upon evaporation, little to no surfactant remains to interfere with trapping or cause water sensitivity in printing inks. During the curing of silicones by the silane/alkene addition reaction, SURFYNOL® 61 surfactant can “block” platinum catalysts through complexation; this effect can be used to delay the curing reaction. However, the SURFYNOL® 61 surfactant typically flashes off upon heating to liberate the active catalyst and trigger the reaction.

EBECRYL® 221 is a hexafunctional aromatic urethane acrylate oligomer which provides very fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 221 exhibit high hardness and solvent resistance.

FORMASHIELD™ 12 is an aqueous all-acrylic emulsion polymer designed for use in premium, ultra-low VOC interior paints. Paints can be formulated with FORMASHIELD™ 12 Binder to actively and irreversibly remove formaldehyde from the ambient air in commercial or residential interior spaces, offering significant improvement in Indoor Air Quality.

Licocare® RBW 300 flakes TP is a partially saponifed wax based on renewable resource.

ELVACE® 40705-00 is used in packaging adhesives and waterborne adhesives. It features excellent adhesion, good hydrolysis resistance, good toughness, increased viscosity, and short bond development time. The product has low grit content and resists plasticizer migration but has poor borax tolerance. It functions as a binder and resin in CASE ingredients and as a resin in plastics and elastomers.

TEGO® DISPers 670 is a polymeric, high-performance wetting and dispersing additive for solvent borne industrial and automotive applications. Suitable for all kinds of pigments. Shows outstanding viscosity reduction, especially with inorganic pigments. Shows fast pigment wetting. Creates a Newtonian flow behavior.

D.E.R.® 755 Liquid Epoxy Resin is a flexibilized epoxy resin based on reaction products of epichlorohydrin with bisphenol-A and polypropylene glycol.

KRONOS® 2056 a versatile pigment with a warm tone.

Dynasylan® 1122 is a secondary aminofunctional ethoxysilane possessing two symmetric silicone atoms. Dynasylan® 1122 acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier and can be used for the chemical modification of substances. Dynasylan® 1122 is a colorless to yellow liquid with an amine- like odor which is, for example, soluble in alcohols, aliphatic or aromatic hydrocarbons.

AP5551 is medium viscosity, polyamide adduct hardener for epoxy resins based lacquers and coatings.

AP 5945 is a low viscosity, non-blushing, cycloaliphatic amine modified hardener for epoxy resin based lacquers and coatings.

HIKOREZ® A-1100S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. And this grade also can be use as the binder for hot melt road marking.