Products

CYMEL® NF 3041 is a formaldehyde-free, partially n-butylated crosslinking agent supplied in n-butanol. It was designed primarily for use in 2 pack ambient cure solvent-borne conversion varnishes for industrial wood. Systems containing CYMEL® NF 3041 exhibit superior catalyzed pot life relative to typical urea-based conversion varnishes and require significantly less catalyst to effect cure. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility.

Dynasylan® AMEO-T is a blend of primary and secondary aminofunctional silanes. The blend contains more than 90 wt% of 3­ aminopropyltriethoxysilane. Aminofunctional silanes posses a reactive amino group and a hydrolyzable ethoxysilyl group. The dual nature of this reactivity allows Dynasylan® AMEO­T to bind chemically to both inorganic materials (e.g. glass, metals and fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter, a surface modifier and a reactive reagent. Dynasylan® AMEO­T is a yellowish liquid with an amine­like odor. It is soluble in alcohols as well as aliphatic or aromatic hydrocarbons.

DB™ Oil is the highest grade of refined castor oil. It was developed for use in applications when a low acidity and moisture content are critical.

CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes CYMEL® UI19-I resin suitable for ambient and low bake industrial wood finishes.

CYMEL® U-1050-10 Resin is a partially n-butylated urea resin supplied in n-butanol and is the HAPS compliant version of CYMEL® U-1050-10 Resin. CYMEL® U-1050-10 Resin has wide compatibility with other film formers and is useful in fast curing industrial baking finishes and low temperature curing conversion varnishes for wood.

CYMEL® U-80 Resin is a highly n-butylated urea resin supplied at >96% solids content. Its high extent of alkylation and hydrophobic nature make the CYMEL® U-80 Resin suitable for a wide range of coating applications, including high solids primers for automotive, general industrial, and container coatings, providing improved film flexibility and adhesion to various substrates. CYMEL® U-80 resin is insoluble in water but can be used in emulsified form as a crosslinking agent in water-dispersible alkyds, acrylic resins, and in emulsion systems.

CYMEL® 27-802 resin is a general purpose partially n-butylated melamine resin supplied in a mixture of n-butanol and xylene . CYMEL® 27-802 combines fast curing speed with good resistance properties making it suitable for a wide variety of industrial bake finishes including decorative metal coatings

CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. CYMEL® U-1054 resin is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, CYMEL® U-1054 provides an excellent balance between adhesion and film flexibility, especially after several cure cycles.

CYMEL® 304 Resin is a specially alkylated, high solids melamine crosslinking agent designed specifically for industrial wood coating applications. Systems formulated with CYMEL® 304 Resin exhibit excellent catalyzed stability and films develop excellent early hardness, resistance properties, appearance, and cold check resistance. It has very low free formaldehyde and low evolved formaldehyde on cure relative to conventional urea-based formulas.

CYMEL® 300 Resin is a highly methylated melamine crosslinking agent and is the purest form of hexa(methoxymethyl)melamine available in our product line. Its high degree of alkylation coupled with its high monomer content makes CYMEL® 300 resin an excellent crosslinker for applications where film flexibility is a premium, such as required in some coil and can coatings.

CYMEL® UI-21-E Resin is a partially iso-butylated urea resin supplied in ethanol. It has been designed for a wide range of high build, low odor industrial wood finishes. CYMEL® UI-21-E Resin is not suitable for exterior applications.

CYMEL® U-65 Resin is a high solids, methylated urea resin designed for use in both water and organo-soluble systems as a crosslinking agent for a variety of polymers that contain hydroxyl functionality.

CYMEL® U-21-511 Resin is a partially n-butylated urea resin supplied in n-butanol and is the HAPs compliant version of CYMEL® U-21-510. It has excellent compatibility with epoxy resins. It is recommended in primer formulations which are to be topcoated and re-baked. Low viscosity and epoxy solution compatibility make this product an ideal modifier.

CYMEL® 3745N Resin is a highly methylated melamine crosslinker designed for use in both solvent-borne and waterborne industrial finishes. Its high functionality and low tendency to self-condense promotes excellent formulated stability and results in films with very good hardness development, flexibility, formability, and resistance properties making it suitable for a wide range of coating applications, like can and container coatings, foil coatings, automotive coatings and waterborne formulations.

CYMEL® U-663 resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties combined with very good block resistance makes CYMEL® U-663 resin suitable for acid curing wood coating applications where low formaldehyde emission and high film gloss is required.