Products

AEROSIL® MOX 170 is a cofumed oxide consisting of silicon dioxide and approximately 1% aluminum oxide, manufactured using the AEROSIL® process.

TEGO® Foamex 3062 is a highly effective defoamer concentrate based on polyether siloxane technology. Very suitable for pigmented and/or highly viscose formulations.

D.E.H.® 445 Epoxy Curing Agent is a modified cylcoalipatic amine based curing agent for epoxy resins. It contains no nonylphenol.

TEGO® DISPers 685 is a high polymeric wetting and dispersing additive for radiation-curing and solventborne formulations.Stabilizes all kindsof pigments, especially organic pigments and carbon blacks. 100% active and liquid, therefore suitable for 100% solids and high solids formulations.

D.E.H.® 7009 is a modified polyamine suitable for solvent free primers. It is free of benzyl alcohol, nonylphenol and bisphenol A. It has also a low viscosity and long pot life.

CRAYVALLAC® LV is a high performance, micronised amide wax rheology modifier suitable for very high-solids and solvent-free applications.CRAYVALLAC® LV overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body. Consequently, coatings formulated using CRAYVALLAC® LV exhibit an enhanced performance such as controlled flow behavior, ease of application and excellent sag resistance. Its very high efficiency even when activated allows to reach very strong shear thinning that can result either in very high sag resistance or interresting balance between viscosity and sag resistance. Therefore CRAYVALLAC® LV is for instance highly recommended in the case of solvent free coatings with relatively low viscosity. It prevents the use of specific equipment for the application that are necessary with more viscous solvent-free coatings.

Ceridust® 1060 Vita is a micronized polar modified wax based on renewable resource.

CYMEL® U-21-510 Resin is a partially n-butylated urea resin supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins. It is recommended in primer formulations which are to be topcoated and re-baked. Low viscosity and epoxy solution compatibility make this product an ideal modifier.

REAFREE® 8597-T is a saturated carboxylated polyester for combination with b-Hydroxyalkylamide type hardeners. Suitable for the formulation of outdoor durable and protective tribochargeable thermosetting powders for electrostatic application. For high gloss systems with improved flow and degassing properties. Gas oven stabilised. TMA free type.

Focus ChloroPar W-50AO is a chlorinated very long chain alkane (C24-28). This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

POLYWATE 325 is a natural off-white barium sulfate. Cimbar’s Polywate products are high in purity, high specific gravity, low solubility and are chemically inert. These properties have made Polywate products the industry standard for quality and performance in a wide range of end-use applications.

Cotrol™ AMB is an ammonium benzoate-based flash rust corrosion inhibitor. It is a cost-effective flash rust inhibitor that does not leave water-soluble components in the cured film thereby causing water sensitivity problems.

DURATRACK™ AEH-100 Resin is a waterborne dispersion of an acrylic-epoxy hybrid polymer designed for high performance two-component (2K) coatings useful for durable traffic markings. The unique acrylic-epoxy hybrid technology facilitates the formulation of low VOC coatings with long pot-life, fast dry and hardness development, and excellent durability properties including UV resistance, adhesion and aggregate retention. DURATRACK™ AEH-100 Resin is an epoxy-functional material that can be crosslinked with typical epoxy hardeners, including amine-based hardeners and acid-functional crosslinkers such as acrylic latexes. It is recommended to formulate with DURATRACK™ R-100 Resin as a two-component waterborne system for traffic coating applications. The ease of the formulation and excellent balance of cost and properties facilitated by DURATRACK™ AEH-100 Resin make it an excellent choice for broad area road markings, such as bike lanes, where high durability and low installation cost are desired.

D.E.H.® 508 curing agent is a modified aliphatic amine designed for use with liquid epoxy resins cured at ambient or elevated temperature. It has low viscosity and results in fast set time, high strength and modulus. It also provides good heat and acid and alkali resistance.

Bleumina® 200 is a specialty carbon black grade designed to exhibit high colour and jetness for multi- purpose pigment application in various plastics, ink and coatings with good UV resistance. Morphological properties of Bleumina® 200 are balanced in such a way that it provides a good combination of dispersibility and colour strength, and it offers very good UV protection and smooth surface finish.