Products

TRIGLYCIDYL ISOCYANURATE (TGIC) JF-77 is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance, weather resistance, adhesive and high temperature performance.

CARPOL® GP-1000-60 Polyolis a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-1000-60 Polyol may also be included as a component in other urethane products and formulations.

WANNATE® TL-75E is an aromatic polyisocyanate based on toluene diisocyanate. It is a colorless or pale yellow liquid with a solvent-like odor with approx. 75 % in ethyl acetate.

CYMEL® 373 resin is a partially methylated melamine supplied in water. Its high reactivity combined with water solubility makes CYMEL® 373 resin suitable for a wide range of fast-curing waterborne industrial coating formulations.

CYMEL® U-1052-8 resin is an n-butylated urea-formaldehyde crosslinking agent supplied in a mixture of n-butanol and xylene. CYMEL® U-1052-8 resin has excellent compatibility with epoxy resins and is particularly suitable for interior can coatings where it contributes to good adhesion and pasteurization resistance. CYMEL® U-1052-8 resin is not recommended for topcoats requiring exterior durability.

CYMEL® UI-27-EI Resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. CYMEL® UI-27-EI Resin is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. CYMEL® UI-27-EI Resin is not suitable for exterior applications.

PARALOID™ AU-2100 is a new acrylic polyol designed for use in low VOC (<2.1 lb/gal) 2K solventborne urethane coatings, specifically for the industrial maintenance coatings market. Standard application viscosities can be achieved without the need for expensive or highly flammable non-VOC solvents. PARALOID Resin AU-2100 can also be formulated as a baking or stoving system with melamine or urea resins, making it suitable for industrial finishes that require faster property development or slightly different performance characteristics.

CYMEL® 1170 resin is a highly butylated glycoluril crosslinker designed for use in both water and organo-soluble coating systems. Its superior adhesion relative to existing melamine and benzoguanamine crosslinkers provides increased corrosion resistance and flexibility. The better adhesion is not lost after postforming of parts and exposure of the stressed coating to humidity, steam, dry heat, or weather. This feature makes CYMEL® 1170 resin a good candidate for coil of metal decoration enamels and primers. In addition, CYMEL® 1170 resin releases significantly lower amounts of formaldehyde during the baking process compared to other amino resins

CARPOL® EDAP-770 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 770. This tetrol is polymerized solely with propylene oxide and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-770 can also be used as a curative for most C.A.S.E. applications.

TMPEOTA is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. TMPEOTA can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, TMPEOTA exhibits the highest reactivity and the greatest viscosity reduction of oligomers.

CARPOL® PGP-3815 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-3815 has a functionality of two and an average molecular weight of 3800 Da. This diol is polymerized with propylene oxide and then capped with 15% ethylene oxide.

EBECRYL® 3720-TM20 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 3720-TM20 exhibits fast cure response and light color. Films of EBECRYL 3720-TM20 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss and surface hardness, and excellent chemical resistance.

EBECRYL® 3203 is a low viscosity modified Bisphenol-A based epoxy acrylate oligomer that provides exceptional pigment wetting properties for black and white inorganic pigments and fillers. EBECRYL® 3203 gives a fast cure response when formulated with other oligomers cured via ultraviolet light (UV) or electron beam (EB). EBECRYL® 3203 is used for the preparation of high pigment loading pigment pastes produced using a 3-roll mill or bead mill.

EBECRYL® 894 is used in radiation-curable coatings. It functions as a monomer and oligomer in CASE ingredients.

CARPOL® PGP-4025-60 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000. This diol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart Carpol® PGP-4000. Main applications include C.A.S.E., however, Carpol® PGP-4025 may also be included as a component in other urethane products and formulations.