Products

AEROSIL® 130 is a single-ingredient silicon dioxide (SiO₂) used as an anti-blocking agent, anti-caking agent, carrier, and dispersant. It is odor-free. This product is compatible with silicone elastomers and is commonly used in varnishes and printing inks. It enhances performance by improving flow and preventing caking in various formulations.

AP 5180 is a chemical blend used as a curing agent in various resin systems. It is commonly employed in CASE (Coatings, Adhesives, Sealants, and Elastomers) applications to promote the curing process. The product consists of a mixture of chemical components, providing effective curing properties for different industrial applications.

ROCIMA™ BT 2S Industrial Microbicide is a preservative and microbicide used in agrochemicals, fluids and lubricants, industrial additives, and plastics and elastomers.

EVATANE® 28-05 is a random ethylene-vinyl acetate copolymer.

HP7031-Coconut Alkyd is a short oil alkyd resin dissolved in xylene that uses coconut oil to produce a resin with initial low colour and little or no yellowing on aging.

3M™ Boron Nitride Cooling Filler Platelets 009 is a engineered to improve thermal conductivity in polymers while maintaining or improving electrical insulation. Their unique properties make these additives suitable for many thermoplastic, elastomer and thermoset resins used in a wide variety of electrical and electronic applications – including thermal interface materials (TIM), consumer electronics and automotive applications.

CLEAR-BLOC® 100-S functions as an anti-blocking agent in industrial additives, plastics, and elastomers.

REAFREE® C4705-10 is a binder and resin used in industrial, paints and coatings applications, specifically for powder coating.

D.E.H.® 538 is a curing agent and hardener used with epoxies (EP) in CASE ingredients.

Dynasylan® HYDROSIL 2909 functions as a surface modifier, coupling agent, and crosslinking agent in industrial additives.

CRAYVALLAC® LA-150 is a new pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to solvent based systems.CRAYVALLAC® LA-150 is a post-addition rheology modifier composed of a modified urea dissolved in DMSO. When added to the final system, the DMSO is diluted and the modified urea crystallizes out as very fine fibres which build into a three-dimensional interacting network. It is this network that gives rise to the system’s shear thinning rheology and time dependent viscosity recovery. The result is excellent control of sedimentation combined with ease of application. Immediately following application, where low shear conditions again predominate, the system’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependency is known as thixotropy and enables the final system to attain very good levelling.

TEGO® Wet 240 is a highly active siloxane-based substrate wetting additive. It shows outstanding fine atomization in spray applications. It is very compatible and recoatable.

EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer. EBECRYL® P115 can be used with EBECRYL® P39 (1) (a polymeric benzophenone derivative) to produce UV cured coatings and inks with low residual odor.

D.E.H.® 85 is a unmodified, phenolic hardener.

D.E.H.® 82 is a Phenolic hardener containing 3.5% curing accelerator and 2.5% flow modifier.