Products

Ceridust® 2020 TP is a micronized synthetic wax, recommended for solvent based coatings and inks, as well as for powder coating application. Ceridust® 2020 TP enhances rub and scratch resistance, improves slip properties and reduces gloss for all kind of printing inks and coatings. It is also a processing agent for powder coatings to increase output and flowability of powder and matting agent therefore.

Dynasylan® 4148 is a surface modifier and functions as a surface modifier in industrial additives.

3M™ Glass Bubbles S22 is specially formulated for a high strength-to-weight ratio. This allows greater survivability under many demanding processing conditions, such as injection molding. They also produce stable voids, which results in low thermal conductivity and a low dielectric constant. 3M glass bubbles are available in a variety of sizes and grades to help you meet your product and processing requirements.

Exolit® AP 740 S is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 S differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence and has compared to Exolit® AP 740 a reduced water uptake. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access.

EBECRYL® 812 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate. Its low viscosity and outstanding color development properties make this product ideal for high pigment content, low viscosity flexo inks. Inks made using this vehicle have excellent adhesion to a variety of substrates common to flexo printing.

Castung™ 103 G-H is an un-bodied dehydrated castor oil (DCO) that can be used with pure and modified phenolic resins to impart alkali resistance for can linings, corrosion resistant coatings, traffic paints, ink vehicles and marine finishes. Castung™ 103 G-H is excellent for formulating alkyd and copolymer resins, where dehydrated castor oil is well known for its non-yellowing and outstanding color retention characteristics.

CRAYVALLAC® PA4 BA 20 is a HAPs-free rheology modifier pre-activated amide wax supplied in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form with enhanced transparency, excellent anti-sagging and anti-settling properties.CRAYVALLAC® PA4 BA 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

D.E.H.® 505 Epoxy Curing Agent is a modified aliphatic amine hardener used as a curing agent for epoxy resins.

D.E.H.® 2720 Epoxy Curing Agent is a high viscosity, modified cycloaliphatic polyamine based curing agent for epoxy resins. It contains no benzyl alcohol and no alkyl phenol.

AEROSIL® R 812 Coating is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia.

AP 1058 LT is a low viscosity, reactive, light colour Phenalkamine hardener for epoxy resins based lacquers and coatings.

CRAYVALLAC® WN-1442 is a wax product consisting of paraffin waxes and hydrocarbon waxes.

ACRYSOL™ WS-68 Emulsion is a thermosetting acrylic polymer supplied as a colloidal dispersion in water. When formulated with monomeric melamine resins, it facilitates the formulation of industrial baking enamels that offer excellent spray characteristics and film properties.

HFGEL 120-A is an organophilic clay designed for use in low to medium polarity solvent based systems. HFGEL 120-A imparts excellent sag resistance, pigment anti-settling and viscosity control.

TAMOL® 963 35% is a versatile, low-cost, non-foaming, water-soluble polyacid dispersant which offers excellent performance in a wide range of latex paint formulations. It is recommended for low sheen flat through semi-gloss acrylic, stirene-acrylic and vinyl acrylic formulations and is effective over a pH range of 7-11 with a wide temperature range.