Products

Bermocoll® Prime 2500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance, and superior colour stability. It improves the consistency, the stability, and the water retention of water based paints.

CARBOWET® GA-100 is a non-ionic grind aid for waterborne formulations. Focus on pigment wetting. Additionally helps deaeration of the millbase.

Licocene® PP 6502 granules is a high melting metallocene-technology based polypropylene homopolymer, which exhibits a high degree of crystallinity.

Focus ChloroPar W-50AO is a chlorinated very long chain alkane (C24-28). This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

POLYWATE 325 is a natural off-white barium sulfate. Cimbar’s Polywate products are high in purity, high specific gravity, low solubility and are chemically inert. These properties have made Polywate products the industry standard for quality and performance in a wide range of end-use applications.

AEROSIL® R 202 is a fumed silica surface-treated with polydimethylsiloxane with very good thickening properties.

K-FLEX® 500 is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate in a ratio of about one to one by weight. K-FLEX® 500 was created to take advantage of the excellent performance of diethylene glycol dibenzoate but with the added advantage of the better handling characteristics imparted by dipropylene glycol dibenzoate. Like K-FLEX DP, K-K-FLEX® 500 is a polar plasticizer that is a high solvator for PVC applications. K-FLEX® 500 is also compatible with polar polymers such as polyvinyl acetate.

BONDERITE® M-MN LUBRITE 2 is a corrosion inhibitor used in 1K (one-component) coatings. It is compatible with iron, metal, and steel substrates, providing high oil absorption, scuff resistance, and preventing metal-to-metal contact. It also offers non-metallic properties for enhanced performance.

TEGO® Foamex 3062 is a highly effective defoamer concentrate based on polyether siloxane technology. Very suitable for pigmented and/or highly viscose formulations.

TEGO® Glide 435 shows good slip effect and substrate wetting without stabilizing foam. It is highly recommended for radiation-curable coatings.

CRAYVALLAC® WF-9200 is a micronised PTFE modified polyethylene wax.

AERODISP® WR 8520 is a 20%dispersion of a hydrophobicfumed aerosil(R) (dimethyldichlorosilane).

D.E.H.® 508 curing agent is a modified aliphatic amine designed for use with liquid epoxy resins cured at ambient or elevated temperature. It has low viscosity and results in fast set time, high strength and modulus. It also provides good heat and acid and alkali resistance.

BONDERITE® L-FG ADAG C is an aqueous-based colloidal dispersion. It contains ultra-fine graphite particles along with a unique stabilizer and binder system. These properties produce excellent lubricity and release, faster wetting, and higher dilution ratios. It remains stable at service temperatures of 600°F and intermittent temperatures as high as 2200°F.

Dynasylan® PTEO an alkyltrialkoxysilane is important component in sol­gel systems. Dynasylan® PTEO is a colorless, low­viscosity liquid. Dynasylan® PTEO is regarded as trifunctional since all three alkoxy groups can hydrolyze. Additionally Dynasylan® PTEO contains a propyl group that adds a hydrophobic character to the coatings. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (­Si­O­Si­). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.