Products

TEGO® DISPers 652 is a wetting and dispersing additive for inorganic pigments. Can be used in direct grinds of solventborne and radiation-curing formulations to reduce the viscosity. As a co-additive in universal colorants, it acts as a compatibilizer.

ACRYSOL™ ASE-75 Thickener is an acid containing, acrylic emulsion copolymer. When the emulsion is diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. ACRYSOL™ ASE-75 Thickener is effective in improving mid to low shear rate (Brookfield) viscosity, resulting in coatings that have highly shear thinning characteristics.

Polyfill 403 is a series alumina trihydrate products are used extensively in elastomers, thermoset plastics, thermoplastic and coating applications where optimum physical properties and surface finish qualities are critical. Use of fine grind Polyfill series products increases flame retardancy and smoke suppression. Polyfill/PolyJet alumina trihydrate products are tightly controlled by Cimbar Performance Minerals ISO 9001:2015 quality program.

TEGO® Phobe 1401 N is an amino-siloxane emulsion for the hydrophobization of coating formulations. It reduces water up take and generates a water-beading effect.

CYCAT® 4040 is a catalyst that improves cure time in CASE ingredients. It functions as a catalyst in various applications.

AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia.

D.E.H.® 802 is a polyamine adduct waterborne curing agent with optimized rheology specially designed to provide superior performance in roller applications. It can be used with liquid Bisphenol A and/or Bisphenol F epoxy resins. It is supplied at 50 % solids in water.

GRANOLITE® P is a pentaerythritol ester of rosin, is a light-colored and deodorized resin suitable in various adhesive and road marking Hot Melt formulations.

SURFYNOL® DF-75 defoamer is an organic-based mineral oil-free additive designed to provide knockdown and sustained defoaming in a wide variety of water-based formulations. Performance benefits can be obtained when this product is incorporated into aqueous inks, overprint varnishes, coatings, adhesives and paper coatings. This compound is particularly useful for foam control in systems that are based upon acrylic resins.

HFGEL 120-X is an organoclay for solvent-based systems of low to medium polarity.

ZINC OXIDE 104P is a brilliant white powder manufactured by the French (Indirect) Process. Grade 104 is our popular medium particle size zinc oxide offering high assay and very low impurities. Grade 104 is approved for pharmaceutical drug use as an excipient, is USFDA approved as GRAS (Generally Recognized As Safe) at 21cfr182.8991 and is authorized by the USFDA for use wherever GRAS is approved including food contact in rubber, plastics, and coatings.

DYNOL™ 604 is an acetylenic diol based super wetter providing very good static and dynamic surface tension reduction in waterborne coatings and inks.

DOP is still widely used as a plasticizer in selected applications where volatiles are less of an issue. It is also used as a hydraulic fluid and as a dielectric fluid in capacitors. DOP was the most widely used material as a plasticizer in manufacturing of articles made of PVC. Due to toxicity reasons, its usage has dropped and has been replaced by lower volatile phthalate and phthalate free products in some PVC and other applications.

Superior Graphite 7005939 is a typical synthetic graphite product made from narrow- sized virgin electrodes using Superior Graphite’s dedicated milling and screening technology. Main uses are stabilization of coefficient of friction, wear reduction, and increase in electrical and thermal conductivity.