Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Chemical Name
- Country of Origin
- Product Code
- MITM13848
- Product Functions
- Single Ingredient
- Yes
- Technologies
- Product Families
Applications & Uses
- Markets
- Applications
- Product Uses
- Cimbar Performance Minerals fine grind Polyfill series alumina trihydrate products are used extensively in elastomers, thermoset plastics, thermoplastic and coating applications where optimum physical properties and surface finish qualities are critical.
- Use of fine grind Polyfill series products increases flame retardancy and smoke suppression.
Regulatory & Compliance
- Compliance (Industry Standards)
- Compliance (Regulatory)
- Manufacturing Facility Standards
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002777
- Principal
Other
- Appearance (SDS)
- White grains
- Explosive Nature (SDS)
- Not explosive
- Insoluble in (SDS)
- Water
- Item Number
- Labeling Claims
- Odor (SDS)
- Odorless
- Physical Form
- Product End Uses
- Protect from Freezing
- No
- Soluble In
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Loss on Ignition 34.6 % by Water - Material Composition
Value Units Test Method / Conditions Aluminum Content 64.9 % Ferric Oxide Content 0.009 % Silica Content 0.01 % as silicon dioxide Soda Content max. 0.3 % Soluble Soda Content max. 0.05 % as sodium dioxide - Optical Properties
Value Units Test Method / Conditions Brightness 98.0 % Hunter "L" - Physical Properties
Value Units Test Method / Conditions Bulk Density 40.0 lb/ft³ Bulk Factor 0.0495 gal/lb Free Moisture Content 0.8 % Median Particle Size 4.0 µm Oil Absorption 40.0 mL/100g Sieve Fractionation (Retained) 0.0 % +100 mesh Sieve Fractionation (Retained) 0.0 % 325 mesh Sieve Fractionation (Retained) 0.0 % + 200 Mesh Specific Gravity 2.42 - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 2980.0 °C At 101.3 Kpa Decomposition Temperature (SDS) 200.0 °C Density (SDS) 2.4 g/cm³ Melting Point (SDS) approx. 300.0 °C At 101.3 Kpa Melting Point (SDS) 3450.0 °F after loss of water of hydration at elevated temperatures Relative Density (SDS) 2.4 - pH (SDS) 8.4-10.2 - 5% water suspension - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 1825.0 d