Products

Foral® 105 resin is the pentaerythritol ester of highly hydrogenated gum rosin. A pale thermoplastic resin, it offers advantages as a tackifier or modifier in various adhesive and coating compositions. Foral® 105 resin exhibits outstanding resistance to oxidation and to discoloration caused by heat and ageing. It has a substantially higher softening point than glycerol rosin esters, and is therefore recommended where a harder resin may be desirable.

WANNATE® HB-200 is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

TEGO® Guard 9000 is an organically modified branched polysiloxane emulsion providing excellent quick set properties. Suitable for various decorative exterior paints.

TEGO® Twin 4100 as a siloxane-based gemini surfactant, combines substrate wetting and anti-crater effects with some defoaming properties. It is highly compatible and suitable for a wide range of different coatings and applications.

#22 Barytes is used as a filler and pigment in frictionizing applications and sound deadening. It is suitable for industrial additives such as ceramics and friction materials, as well as plastics and elastomers like carpet backing.

AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxidein the ratio of 5:1.

WANNATE® IT-100 is a cycloaliphatic polyisocyanate based on isophorone diisocyanate. WANNATE® IT-100 is a solvent-free material, supplied as pellets. This cycloaliphatic polyisocyanate is light-stable and non-yellowing. It has especially been developed as an isocyanate crosslinking agent for 2K PUR coatings or adhesives. It is also supplied as 70 pbw. solutions in various solvents.

Exolit® AP 435 is a fine particle ammonium polyphosphate (phase II) optimized for low viscosity in aqueous suspension and intumescent coatings. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.

WANNATE® HTBL-175S is a MEKO blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 25% Solvent naphtha 100, colorless to slightly yellowish clear liquid.

TEGO® Wet 250 is a highly active siloxane-based substrate wetting additive. It shows good substrate wetting properties and is suitable for a broad range of coatings. Is is very compatible and recoatable.

TEGO® DISPers 755 W is a slightly anionic,polymeric high-performance wetting and dispersing additive for waterborne formulations.Suitable for all kindsof pigments. With organic pigments, the outstanding stabilization and viscosity reduction can be observed. Low influence on coating properties, therefore suitable for exterior applications in industrial and transportation coating.Solvent-free.

TEGO® Glide 410 shows oustanding slip and excellent anti-crater properties. It is highly effective and can be used in a broad rangeof different coatings and inks.

D.E.H.® 804 is an amine curing agent dissolved in water and designed to emulsify epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol. D.E.H.® 804 is an amine curing agent dissolved in water and designed to emulsify epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol. Benefits D.E.H. 804 serves as a curing agent for self-leveling floorings. When cured with D.E.R. 3221 above a D.E.H. 805 based primer, D.E.H.® 804 did not contribute to significant emissions, such that the full flooring system could pass the AgBB evaluation scheme and get labeled A+ according to the French labeling of construction products evaluation scheme. D.E.H.® 804 is also suitable for the development of flooring on green concrete or where water is expected to migrate from the substrate.

D.E.H.® 580 is a cycloaliphatic amine used as a curing agent for epoxy resins in applications requiring self leveling, chemical and blush resistance. It results in a blush-free product with excellent chemical and water spot resistance.

Bluesil™ FLD 47 V1 000 is straight chained polydimethylsiloxanic fluids.