Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Product Code
- MITM15618
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Benefits
- Wannate® HTBL-175S can be used as the hardener in colorfast and weather-stable, one-component polyurethane coatings.
- The stoving temperature can be significantly reduced by the addition of a catalyst, e.g. dibutyltin dilaurate (DBTL), without reducing the storage stability.
- The product is used in high-grade industrial finishes (electrical appliances, small components, can coatings, coil coatings, etc.) and in primer surfacers and topcoats for automative finishing. Wannate® HTBL-175S can also be used as an additive in conventional stoving systems to improve the flexibility and adhesion.
Applications & Uses
- Coating End Applications
- Compatible Polymers & Resins
- Markets
- Applications
Properties
- Physical Form
- Compatibility Information
Given equivalent crosslinking (NCO/OH = 1.0). Wannate® HTBL-175S is miscible with polyester polyls, polyether polyols and polyacrylates. Wannate® HTBL-175S can also be combined with various plasticisers, e.g. phosphoric acid, sulphonic acid, adipic acid and phthalic acid esters. The combinations should always be tested for their compatibility.
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
- Packaging Information
- 20kg Metal drum
- 215kg Metal drum
Principal Information
- Group Principal Number
- S002918
- Principal
Storage & Handling
- Storage and Shelf Life Conditions
- Store in tightly closed containers to prevent moisture contamination.
- Recommended storage temperature: 0 ~ 30°C.
- Protect from moisture, heat and foreign material.
- General information: Storage at higher temperatures will result in increase of color and viscosity.
- Storage at significant lower temperatures will result in solidification.
- This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
- It can remain stable at least for 6 months at room temperature if stored properly.
Other
- Appearance
- Colorless to slightly yellowish clear liquid
- Color (SDS)
- Colorless to light yellow
- IATA/ICAO Emergency Response Guide
- 3L
- IATA/ICAO Proper Shipping Name
- Resin solution flammable
- IATA/ICAO UN Number
- UN1866
- IMO/IMDG EmS Fire
- F-E
- IMO/IMDG EmS Spill
- S-E
- IMO/IMDG Proper Shipping Name
- Resin solution flammable
- IMO/IMDG UN Number
- UN1866
- Item Number
- Other Hazards
- Liquid.Flammable.Harmful by inhalation.May cause SENSITISATION by inhalation.May cause SENSITISATION by skin contact.May cause CANCER.May cause heritable genetic damage.Repeated exposure may cause skin dryness and cracking.
- USA/DOT Proper Shipping Name
- Resin solution, flammable
- USA/DOT UN Number
- UN1866
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 60.0 Hazen Hazen - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life1 6.0 mo mo - Physical Properties
Value Units Test Method / Conditions Density 1.06 g/cm³ g/cm³ At 25°C Flash Point 45.0 °C °C Viscosity 2500.0-4000.0 mPa.s mPa.s At 25°C - Material Composition
Value Units Test Method / Conditions Isocyanate Content max. 0.2 % % Isocyanate Content 11.1 % % as Blocked Solid Content 73.0-77.0 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Flash Point (SDS) 45.0 °C °C Lower Explosion Limit (SDS) 1.0 % % Relative Density (SDS) 1.06 - at 20°C, Water = 1 Upper Explosion Limit (SDS) 7.5 % % Viscosity (SDS) 3200.0 mPa.s mPa.s at 25°C