Products

Metasol® TK-25 A.D. is a chemical mixture used in building and construction, fluids and lubricants, industrial applications, and industrial and assembly adhesives.

TEGO® Foamex 805 N is a very compatible defoamer emulsion based on polyether siloxane technology. Highly suitable for post-addition.

TAMOL® 851 is a versatile polyacid dispersant that offers outstanding performance in a wide range of latex paint formulations. TAMOL® 851 is supplied at 30% solids in water and is free of both formaldehyde preservatives and ammonia. It is recommended for flat through semigloss acrylic, stirene/acrylic, and vinyl acrylic formulations. TAMOL® 851 is specifically designed to offer excellent stability in those formulations that contain zinc oxide.

BONDERITE® L-FG ADAG C is an aqueous-based colloidal dispersion. It contains ultra-fine graphite particles along with a unique stabilizer and binder system. These properties produce excellent lubricity and release, faster wetting, and higher dilution ratios. It remains stable at service temperatures of 600°F and intermittent temperatures as high as 2200°F.

TEGO® DISPers 761 W is a non-ionic wetting and dispersing additive with focuson pigment wetting. Showsoutstanding color strength development and viscosity reduction when used in the mill base for flexo and gravure inks. With carbon blacks, it provides high pigment loadings, high jetness, and long-term stability.

RHOPLEX® ASE-75 is an acrylic thickener used to increase viscosity.

EBECRYL® P39 is a polymeric benzophenone derivative that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. Recommended levels are from 8 to 10% based on total formulation. EBECRYL® P39 should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100, or with amine modified acrylate resins. EBECRYL® P39 is a polymer preparation manufactured in the European Union with (pre)registered monomers/reactants and REACH compliant.

TEGO® Phobe 1409 is an amino-siloxane emulsion for the hydrophobization of coating formulations. It reduces the water uptake and generates a water-beading effect, even in paints with high pH value.

ZETASPERSE® 3800 is a polymeric, slightly anionic wetting and dispersing additive for high-quality waterborne formulations. It is suitable for all kinds ofpigments. ZETASPERSE® 3800 outstandingly provides color strength with organic pigments and stabilization for inorganic pigments and carbon blacks. It has a low influence on coating properties, is solvent-free and free of labeling.

EBECRYL® P116 HP is a photoinitiator used in radiation cure applications. It is compatible with wood substrates.

CRAYVALLAC® WS-4700 is a 40% active dispersion of polyethylene wax in isopropanol. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WS-4700 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties.

EBECRYL® 4141 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal.

ACRYSOL™ RM-6000 Rheology Modifier is a nonionic urethane rheology modifier based on solvent-free1 technology offering improved efficiency without sacrificing key performance properties. The efficiency in both the medium shear and high shear range results in good flow and leveling with high film build while maintaining good sag resistance. ACRYSOL™ RM-6000 Rheology Modifier has demonstrated utility in a broad range of emulsions, including the “newer generation”, low-VOC types such as RHOPLEX™ SG-30 Acrylic Emulsion and RHOPLEX™ ML-300 Acrylic Emulsion.

Focus Nilfoam 718 is a free-rinsing, organo silicone emulsion and is very effective on a range of surfactant based foams in water-based systems. Focus Nilfoam 718 will effectively control foam in a variety of applications including metalworking coolants, water-based adhesives, wastewater treatment systems, and latex systems.

TEGO® AddBond DS 1300 improves adhesion of water borne coatings on steel, galvanized steel, aluminum, and plastics.