Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Country of Origin
- Function
- Thickener
- Product Code
- MITM11272
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Features and Benefits
- Improved efficiency
- Excellent flow/sag balance
- Enhances gloss potential
- Solvent free and low odor
- Broad formulation latitude
- Use over a wide pH range
- Formulated to resist microbial contamination
- Ease of handling
Applications & Uses
- Application Method
- Compatible Polymers & Resins
- Markets
- Applications
- Product Applications
- ACRYSOL™ RM-6000 Rheology Modifier offers a distinct rheology profile and can replace traditional combinations of medium- and high-shear urethane rheology modifiers. Depending on the formulation, the rheology modifier dosage can be reduced up to 40%.
- ACRYSOL™ RM-6000 Rheology Modifier is recommended in a wide range of sheen through high gloss paints. It can be used either alone or in combination with other thickeners, including ACRYSOL™ RM-5000 Rheology Modifier, to help improve application properties such as sag resistance and brush-and roller-loading.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000005
- Principal
Storage & Handling
- Storage Conditions
ACRYSOL™ RM-6000 Rheology Modifier is stored in tightly closed original containers at temperatures recommended on the product label.
- Handling Information
- Dispose of ACRYSOL™ RM-6000 Rheology Modifier in accordance with all local, state (provincial) and federal regulations. Empty containers may contain hazardous residues.
- ACRYSOL™ RM-6000 Rheology Modifier and its container must be disposed in a safe and legal manner.
Other
- Appearance
- Hazy white to off white liquid
- Color (SDS)
- Clear or hazy colorless to pale yellow
- Item Number
- Other Hazards
- No data available
- USA/DOT UN Number
- Not Applicable
- Physical Properties
Value Units Test Method / Conditions Density 8.7 lb/gal lb/gal Viscosity 3000.0-5000.0 cPs cPs Brookfield Viscometer - Material Composition
Value Units Test Method / Conditions Active Polymer Content 17.5 % % Solid Content 17.5 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C °C at 760 mmHg, water Boiling Point (SDS) 100.0 °C °C Evaporation Rate (SDS) max. 1.0 % % Butyl acetate = 1 Evaporation Rate (SDS) max. 1.0 % % Butyl acetate = 1, water Melting Point (SDS) 0.0 °C °C Melting Point (SDS) 0.0 °C °C Water Relative Vapor Density (SDS) max. 1.0 - Air = 1, Water Relative Vapor Density (SDS) max. 1.0 - Air = 1 Specific Gravity (SDS) 1.0-1.2 - Water = 1 Viscosity (SDS) 2500.0-5000.0 mPa.s mPa.s Volatile Content (SDS) 81.0-84.0 % % pH (SDS) 4.0-8.0 -