Products

CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post addition to solvent-based low polarity coating systems, it provides a very simple and direct mean of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. It is a softer version than CRAYVALLAC® PA3 WDA 20 with enhanced ease of incorporation. It is also a very cost efficient alternative to organoclays. The shear-thinning characteristic provides a very high viscosity under the low shear rates and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling.

CARPOL® NIONIC™ L-81 Surfactant is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® NIONIC™ L-81 Surfactant can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature and CARPOL® NIONIC™ L-81 Surfactant is a good low temperature defoamer. These materials are water soluble at low temperatures and will flocculate when warmed above their cloud point. In addition these products are easily removed and leave no residue on the surfaces.

TEDA-L33 is a chemical mixture and blend used as a catalyst in industrial additives.

Thetaguard™ FA-1000 is an oil repellent and wetting agent used in eggshell paint, flat paint, latex paint, solventborne and waterborne coatings, varnishes, and printing inks. It offers dirt pickup resistance and improves cleanability.

ACEMATT® OK 630 is a wax-treated, medium particle-sized precipitated silica. By offering very high compatibility, it can be used in a large variety of coatings.

CRAYVALLAC® WN-1110 is a micronised modified polypropylene wax.

CARPOL® NIONIC™ 1100 is a blend of polyethers, primarily glycerol ethoxylated propoxylated and polyalkylene glycol. It functions as a nonionic surfactant.

Waynflash™ 111 is a liquid flash rust inhibitor which contains sodium nitrite as part of its flash rust inhibition matrix. It is a highly effective inhibitor for the flash rusting on ferrous substrates during aqueous paint phase. It has also proven to be affective in preventing in can rusting. Typical used levels range from 0.25 - 1.0% max. based upon total formula weight. It is highly versatile and can be used in any water based systems. WaynflashTM 111 exhibits good paint stability and can be incorporated at any stage of paint manufacturing. It is both HAPS and APEO free.

COPRO® CP-501 is a non-ionically stabilized, carboxylated styrene-butadiene copolymer latex that contains a non-staining antioxidant.

Hybricor™ 204 is an organic/inorganic hybrid corrosion inhibitor pigment, a proven effective replacement for Cr⁶⁺ in aerospace primer applications on aluminum and other non-ferrous substrates. The fine particle size of Hybricor™ 204 (7 Hegman) permits it to be easily incorporated into a coating using a high speed disperser. It is effective in primers, DTM and thin film (20 micron) applications. It does not affect pot life of 2K systems.

CRAYVALLAC® WF-1039 has been especially designed to give textured finishes to polyester and hybrid powder coating systems. This texturing agent is easily incorporated using conventional premixing techniques prior to extrusion.

RE:CHEMISTRY MOVE200 is a pure ester-based Solvent. 58% Biogenic Carbon (derived from agricultural waste) according to ASTM D6866-20. Readily biodegradable. Non-flammable, Non-combustible and Low volatile. Classified as Non-corrosive, Non-sensitizing and Non-toxic. Miscible in conventional organic solvents and water. Butyl Levulinate is a GRAS.

COPRO® SP-490 is a multi-functional acrylic emulsion polymer.