Products

UVACURE® 1600 is thermally stable iodonium salt photoinitiators are used to induce the polymerization of epoxides and other cationically polymerizable materials on exposure to UV light. UVACURE® 1600 is p-(octyloxyphenyl)phenyliodonium hexafluoroantimonate in solid form. It is compatible with most UV cationic cure systems and is especially useful for the rapid polymerization of thin clear coatings on metal, plastic, and paper substrates. Coatings cured using UVACURE® 1600 generally exhibit excellent adhesion, particularly on metal substrates.

EBECRYL® P104 is an acrylated amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL P104 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Recommended levels are from 5 to 15% based on total formulation, usually combined with 3-5% photosensitizer. EBECRYL P104 can be used with EBECRYL P39 (a polymeric benzophenone derivative) for formulations requiring low residual odor.

EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 7110 reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. EBECRYL® 7110 also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings.

EBECRYL® P116 HP is a photoinitiator used in radiation cure applications. It is compatible with wood substrates.

EBECRYL® 7100 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7100 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 7100 reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. EBECRYL® 7100 also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings.

EBECRYL® P39 is a polymeric benzophenone derivative that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. Recommended levels are from 8 to 10% based on total formulation. EBECRYL® P39 should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100, or with amine modified acrylate resins. EBECRYL® P39 is a polymer preparation manufactured in the European Union with (pre)registered monomers/reactants and REACH compliant.

CYCAT® 500 is a catalyst used in electrostatic spraying applications, particularly in coil coating, e-coat & electrodeposition, primers, and solventless or high solids coatings. It features good cure acceleration, high electrical resistance, improved adhesion, and low energy consumption. It functions as a catalyst in CASE ingredients.

REAFREE® C4705-10 is a binder and resin used in industrial, paints and coatings applications, specifically for powder coating.

EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer. EBECRYL® P115 can be used with EBECRYL® P39 (1) (a polymeric benzophenone derivative) to produce UV cured coatings and inks with low residual odor.

CYCAT® 6020 is a catalyst from the chemical mixtures and blends family, used as a catalyst in CASE ingredients.

CYCAT® XK 406 N is a catalyst used in can coating and lacquer applications. It features high crosslinking and stain resistance, functioning as a catalyst in CASE ingredients.

CYCAT® 600A is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol).

CYCAT® 296-9 is an unique acid catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges.

Cotin® 227 is a dibutyltin diacetate, a liquid organotin catalyst recommended for the manufacture of silicone and polyurethane systems. It can be used in these primary reactions as well as secondary types such as allophanate and biuret formation.

Coscat® 83 is an organobismuth compound that was specifically developed as a catalyst for two component, polyurethane systems. For soft to medium hardness systems the addition of a zinc catalyst can reduce a potential lag in final cure, yielding a stronger final cure typical of a mercury-based catalyst.