Products

CRAYVALLAC® WF-1039 has been especially designed to give textured finishes to polyester and hybrid powder coating systems. This texturing agent is easily incorporated using conventional premixing techniques prior to extrusion.

Dynasylan® TES functions as a surface modifier in CASE ingredients.

Dynasylan® IBTEO is a clear colorless liquid and soluble in common non­polar organic solvents (e.g. petroleum ether, toluene). However its low volatility and viscosity make Dynasylan® IBTEO an easy­to­handle additive. During the hydrolysis reaction between water and Dynasylan® IBTEO a certain amount of ethanol (VOC) is released.

Dynasylan® VTEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable inorganic triethoxysilyl group. The dual nature of its reactvity allows Dynasylan® VTEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as a crosslinking agent, adhesion promoter and/or surface modifier. Dynasylan® VTEO is a colorless, low­viscosity liquid with a typical aromatic odor.

Dynasylan® 1122 is a secondary aminofunctional ethoxysilane possessing two symmetric silicone atoms. Dynasylan® 1122 acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier and can be used for the chemical modification of substances. Dynasylan® 1122 is a colorless to yellow liquid with an amine- like odor which is, for example, soluble in alcohols, aliphatic or aromatic hydrocarbons.

Pentalyn® FC is used in coatings for paper coating and water-reducible paints, in industrial additives for wax emulsions, and in ink & toner applications for flexography ink and waterborne ink. It features acid functionality, excellent adhesion, block resistance, solubility, fast solvent release, good hardness, thermoplastic properties, high gloss, and a high softening point. It functions as an adhesion promoter, binder & resin, coupling agent, and gloss enhancer in CASE ingredients, and as a resin in industrial additives.

ACEMATT® 790 is an untreated, medium particle sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.

DOCCO 007 Gloss Oil is a 70% solids gloss rosin varnish dissolved in solvent naphtha. In comparison to DOCCO #006, DOCCO #007 Gloss Oil dries faster and to a higher hardness.

TEGO® Rad 2300 is an efficient non-foaming, radically cross-linkable substrate wetting and slip additive. Recommended even for high shear applications and the wetting of low energy substrates including fresh litho inks.

Dynasylan® 9116 is a monomeric long-chain alkylfunctional silane. Dynasylan® 9116 is a clear colorless liquid and soluble in common non-polar organic solvents (e.g. petroleum ether,toluene). However its low volatility and viscosity make Dynasylan® 9116 an easy-to-handle additive. During the hydrolysis reaction between water and Dynasylan® 9116 a certain amount of methanol (VOC) is released.

ACEMATT® HK 440 is an untreated, extremely coarse particle sized precipitated silica. It is especially recommended for base coats, thick-film applications, and general industrial coatings.

DERCOLYTE® S 115 is produced from the polymerisation of beta pinene. Is a tackifying resin recommended to improve the adhesive properties (tack, adhesion) of solvent based adhesive formulations, particularly in pressure sensitive adhesives (PSA).

Bluesil™ FLD 21648 is a medium viscosity amino functionalized siloxane, specially developed for the formulation of elastomeric coatings destined for use in textile applications, waterproofing of substrates, or polishes.

Bluesil™ EMUL E1P is an oil in water emulsion containing 35% of a silicone oil. It can be used in many industries.

ACEMATT® 810 is an untreated, coarse particle sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.