Products

EBECRYL® 1710 is an acrylic polymer diluted 60% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). EBECRYL® 1710 is used as the primary or a modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to improve film properties such as adhesion and lay-down.

EBECRYL® 8414 is a urethane acrylate developed for liquid energy curable thermoforming inks. Flexographic inks made with EBECRYL® 8414 exhibit excellent thermoformability with draws up to 1" without cracking, blistering, separation or loss of adhesion. This medium viscosity oligomer has good pigment wetting capability and ink performance.

EBECRYL® IBOMA (isobornyl methacrylate) is a mono functional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® IBOMA forms homopolymers and copolymers. EBECRYL® IBOMA is compatible with a wide range of acrylated and methacrylated resins.

EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. When used together with EBECRYL® 8413, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

EBECRYL® PEG200DMA (polyethylene glycol di-methacrylate), CAS N° 25852-47-5, is a difunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® PEG200DMA forms homopolymers and copolymers. EBECRYL® PEG200DMA is compatible with a wide range of acrylated and methacrylated resins.

EBECRYL® 8413 is designed as the pigment grind oligomer for UV cured thermoformable ink applications and is designed for use in conjunction with the letdown oligomer, EBECRYL® 1300. EBECRYL® 8413 exhibits good milling properties and has very high elongation (550%). When used together with EBECRYL® 1300, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

EBECRYL® 416 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted with trimethylolpropane triacrylate (TMPTA) monomer . Films of EBECRYL® 416 cured by ultraviolet light (UV) or electron beam (EB) display good adhesion to metals, plastics and paper.

EBECRYL® 811 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 811 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates.