Products

POLYMEG® 2000 is used in polymer manufacturing and is applied in industrial and assembly adhesives.

CARPOL® PGP-400-50 is a propylene glycol-initiated polyether polyol. The resulting material has a nominal functionality of two and a molecular weight of 400 Da. The low functionality and viscosity of this polyol makes for a versatile product. It may be used in rigid foam systems to lower the viscosity of B-side materials while helping control crosslinking.

CARPOL® GP-700 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E. and flexible foam, however, CARPOL® GP-700 may also be included as a component in other urethane products and formulations.

CARPOL® GP-1000 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-1000 may also be included as a component in other urethane products and formulations.

EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 also contains primary hydroxyl groups that can be utilized for dual cure polymerization. Dual cure can provide instantaneous tack-free coating surfaces via UV or EB exposure while reaction of the hydroxyl groups with a suitable isocyanate enables polymerization in regions of the coating where UV or EB energy exposure is insufficient or absent.

Dynasylan® SILBOND® PURE functions as a surface modifier and crosslinking agent in CASE ingredients.

CYMEL® 303 LF resin is a highly methylated, monomeric melamine crosslinker supplied in liquid form at ≥ 98% solids content. Its high extent of alkylation and low tendency to self-condense make CYMEL® 303 LF resin a highly effective crosslinking agent for a broad range of applications such as can, container, automotive and general industrial coatings. While CYMEL® 303 LF resin is insoluble in water, it shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized waterborne formulations.

EBECRYL® 811 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 811 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates.

PTMEG-1800 is used in industrial and assembly adhesives and is compatible with polyamide, polyesters, and polyurethane substrates.

CYMEL® MB-94 resin is an n-butylated melamine crosslinker with a high degree of alkylation and very low free formaldehyde. CYMEL® MB-94 resin is designed for use in combination with urea resins for acid curing wood finishes to improve chemical resistance and cold check properties while maintaining fast drying properties.