Products

Non-Leafing Type Aluminium Paste TZ-7155A is a chemical mixture used in paints and coatings. It features non-leafing properties for case ingredient applications.

Non-Leafing Type Aluminium Paste MG1200 is a chemical mixture used in paints and coatings. It features non-leafing properties for case ingredient applications.

Wayncor™ 211 is an anti-corrosion inhibitive pigment that is very effective in solvent and water based epoxy primers. It does not affect the pot life of 2K systems. It can also be used alone or as a synergist with Zinc Phosphate. Typical use level is between 3 - 7 % total formula weight.

Non-Leafing Type Aluminium Paste TZ-788A is a chemical mixture with non-leafing properties used in case ingredient applications.

Wayncor™ 224 is a white non-refractive, corrosion inhibitive pigment used in protective coatings systems. It is compatible with a wide assortment of commercially available resin systems. It can provide an economic alternative to standard grade zinc phosphate. Performance can vary depending upon choice of resin system, but in general the use level would be between 3 - 10% total formula weight.

BONDERITE® S-FN 109B is one of a series of coatings designed to provide controlled electrical properties. BONDERITE® S-FN 109B is a dispersion of finely divided graphite in a thermoplastic resin. This product rapidly air dries to form a flexible conductive coating. It is designed to be applied by typical spray or printing techniques. The flexibility of this product makes it an excellent choice for coating plastic as well as metal. BONDERITE® S-FN 109B is tested for 11 elemental impurities. The high purity level of BONDERITE® S-FN 109B makes for a highly conductive, flexible coating.

Wayncor™ 205 is an anti corrosion pigment that utilizes a calcium ion exchange mechanism to inhibit the corrosion process. Its near neutral pH allows it to be used in a wide variety of formulas without a negative impact on paint stability. The fine Hegman grind (6.5 minimum) permits its use in thin film applications (4 - 10 microns) such as coil coatings and in more traditional industrial applications where the dry film thickness is higher. This fine Hegman value also allows the product to be high speed dispersed. The Wayncor™ 205 mechanism works well on both ferrous and non-ferrous substrates. Wayncor™ 205 can be used as the sole corrosion inhibitor or synergistically with other inhibitive technologies.

ROPAQUE™ ULTRA EF Ammonia-free Opaque Polymer expands the boundaries of light scattering technology, one of the most efficient dry hiding in interior and exterior coatings. Additionally, this non-film-forming synthetic pigment is specially engineered to improve the economics of waterborne coatings while maintaining coating performance. ROPAQUE™ ULTRA EF Ammonia-free Opaque Polymer is a hollow-sphere polymeric pigment that allows paint manufacturers to reduce the raw material cost of their formulations with little to no performance penalties. ROPAQUE™ Ultra Opaque Polymer and ROPAQUE™ Ultra EF Ammonia-free Opaque Polymer are the most efficient products in the ROPAQUE™ Opaque Polymer product family. ROPAQUE™ Ultra Opaque Polymer is neutralized with ammonia, and ROPAQUE™ Ultra EF Ammonia-free Opaque Polymer is neutralized with sodium hydroxide.

Strontium Chromate 177 with the chemical formula of SrCr04, is a low dust and very low oil absorption corrosion inhibitor pigment. It is recommended for high solids primer formulations. It is characterized by a unique high apparent bulk density and is widely used in aerospace primers for aluminum protection.

Wayncor™ 240 is a white Basic Zinc Molybdate anti-corrosive pigment which imparts good corrosion resistance to protective primers. It has a wide variety use in thermo set and thermo plastic systems. It can be used alone or in conjunction with other anti-corrosive additives. The typical use level for this product is between 3 - 7% based on total formula weight. It has a small particle size and narrow distribution which will permit it to be used in wash primers, DTM, or primer applications.

Non-Leafing Type Aluminium Paste TZ-588A is a chemical mixture used in paints and coatings. It features non-leafing properties for case ingredient applications.

NuTone® 302 is a US FDA compliant black, that meets regulation 21 CFR 178.3297. It is available in powder form for coating application and suitable for cookware items.

Hybricor™ 204 is an organic/inorganic hybrid corrosion inhibitor pigment, a proven effective replacement for Cr⁶⁺ in aerospace primer applications on aluminum and other non-ferrous substrates. The fine particle size of Hybricor™ 204 (7 Hegman) permits it to be easily incorporated into a coating using a high speed disperser. It is effective in primers, DTM and thin film (20 micron) applications. It does not affect pot life of 2K systems.

Wayncor™ CIA 300 is a zinc based organic inhibitor. It is effective in a wide variety of systems and can be used as a stand-alone inhibitor or synergistically with other corrosion inhibitors to significantly improve corrosion resistance. It is supplied as an easily dispersible pigment. Typical use levels as a synergistic additive range form 0.5 - 2.5% total formula weight and from 3 - 7% total formula weight as a stand-alone inhibitor.

NuTone® 306 is a high structure general purpose powder pigment black suitable for water- based printing inks and a broad field of liquid ink applications. It provides good color intensity with excellent dispersion in water-based flexographic inks. The product has a unique combination of surface area and structure especially suited for good covering power and good color strength with a blue undertone.