Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Chemical Name
- Country of Origin
- Plastics & Elastomers Functions
- Product Code
- MITM15661
- Single Ingredient
- Yes
- Synonyms
- Acetylene Black, Furnace Black, Lamp Black, Thermal Black
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
Applications & Uses
- Industrial Additives End Use
- Ink & Toner End Applications
- Plastics & Elastomers End Uses
- Markets
- Applications
- Product Applications
NuTone 306 can be used in Adhesives and Sealants, where it provides UV protection and imparts suitable rheology. It is also suitable for PVC compounding application. The dispersion of NuTone 306 carbon black depends on the equipment used and the formulation.
Properties
Regulatory & Compliance
- Quality Standards
Packaging & Availability
Principal Information
- Group Principal Number
- S003252
- Principal
Other
- ADR/RID/ADN Proper Shipping Name
- Not Applicable
- ADR/RID/ADN UN Number
- Not Applicable
- Appearance
- Black pigment powder
- Appearance (SDS)
- Black color
- Dust Explosion Class (SDS)
- ST1
- Dust Explosion Class (SDS)
- ST1
- Explosive Nature (SDS)
- Dust may form explosive mixture in air
- IATA/ICAO Proper Shipping Name
- Not Applicable
- IATA/ICAO UN Number
- Not Applicable
- IMO/IMDG Proper Shipping Name
- Not Applicable
- IMO/IMDG UN Number
- Not Applicable
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- At a higher temperature of 400°C (>752°F) Carbon Black burns slowly and can produce hazardous carbon monoxide (CO), carbon dioxide (CO2 ) and oxides of sulfur. Effective houskeeping and careful engineering practice are required to reduce th eemission of carbon black, May cause reversible mechanical irritation to the eyes, skin and respiratory tract especially at concentrations above the occupational exposure limit.
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Application Information
Value Units Test Method / Conditions Dosage (Use Level) 4.0-6.0 % % Adhesives & Sealants Dosage (Use Level) 10.0-20.0 % % Liquid Inks - Material Composition
Value Units Test Method / Conditions Peroxyacyl Nitrate Content 1.12 cm³/g cm³/g - Optical Properties
Value Units Test Method / Conditions Color Intensity 104.0 % % - Physical Properties
Value Units Test Method / Conditions Heating Loss 0.6 % % as shipped Sieve Fractionation (Retained) 12.0 ppm ppm 325 µm Specific Surface Area 80.0 m²/g m²/g Specific Surface Area 85.0 m²/g m²/g Nitrogen - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) min. 140.0 °C °C Bulk Density (SDS) 200.0-680.0 kg/m³ kg/m³ granules Bulk Density (SDS) 100.0-420.0 kg/m³ kg/m³ Powder Bulk Density (SDS) 200.0-680.0 kg/m³ kg/m³ water = 1, Granules Bulk Density (SDS) 100.0-420.0 kg/m³ kg/m³ water = 1, Powder Explosion Limit (SDS) 50.0 g/m³ g/m³ VDI 2263 Furnace black, dust, Lower Explosive Pressure (SDS) 10.0 bar bar Explosive Pressure Rise Rate (SDS) 30.0-100.0 bar/s bar/s Initial Boiling Point (SDS) min. 4000.0 °C °C Lower Explosion Limit (SDS) 50.0 g/m³ g/m³ VDI 2263 dust, furnace black Maximum Explosion Pressure (SDS) 10.0 bar bar Minimum Ignition Energy (SDS) min. 10000.0 MJ MJ VDI 2263 Minimum Ignition Temperature (SDS) min. 500.0 °C °C Minimum Ignition Temperature (SDS) min. 500.0 °C °C BAM Furnace cloud Minimum Ignition Temperature (SDS) min. 500.0 °C °C VDI 2263 cloud Minimum Ignition Temperature (SDS) min. 400.0 °C °C VDI 2263 layer Molecular Weight (SDS) 12.01 g/mol g/mol Relative Density (SDS) 1.7-1.9 - at 20°C Relative Density (SDS) 1.7-1.9 - at 20°C, Water = 1 Volatile Content (SDS) max. 2.5 %(V/V) %(V/V) non-oxidised carbon black Volatile Content (SDS) 2.0-8.0 %(V/V) %(V/V) oxidised carbon black pH (SDS) 2.0-10.0 - at 20°C, 50 g/l H₂O pH (SDS) 2.0-10.0 - at 20°C, 50 g/L, water, as supplied - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 730.0 d d