Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Country of Origin
- Function
- Pigment
- Product Code
- MITM04863
- RTU Product Type
- Single Ingredient
- No
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Ready-to-Use Product Features
- Key Features and Benefits
- Product Features
- Tested for 11 different elemental impurities, providing a
- highly pure coating
- The highly flexible thermoplastic resin provides
- excellent adhesion to most metal and plastic substrates
- Fast-drying and curing system
- Product Benefits
- Very controlled electrical properties, reducing scrap and rework
- Controlled dry film thickness free of cracks providing controlled electrical properties, reducing scrap and rework
- Reduced energy costs; faster production rates for increased productivity and equipment utilization
- Product Features
Applications & Uses
- Application Area
- Application Format
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Application and Usage Information
- Product Application :
- Battery current collector coating
- Transformer bushing coating
- Cable coating
- Flexible conductive coating for plastics and metals
- Usage Information:
- Method of Use
- Surface Preparation:
- Surfaces to be coated must be clean, dry, and free of dust.
- Mixing/Blending/Dilution
- For spray application, use a mechanical stirrer or paint shaker to mix BONDERITE® S-FN 109B thoroughly until it is of uniform consistency. Check to see that no sediment remains in the bottom of the container. Pour into a suitable container for dilution (e.g., pressure pot, etc.) BONDERITE S-FN 109B (known as DAG 109B) should initially be diluted 1:1 by volume with MIBK, MEK, or lacquer thinner. Final production dilution ratios may vary slightly according to individual needs. To dilute, add solvent to BONDERITE S-FN 109B (known as DAG 109B) and continue stirring until mixture is of uniform color.
- Spray Application
- For small production work and prototypes, a suction cup gun may be used providing BONDERITE® S-FN 109B is thoroughly mixed prior to spray application. For intermediate production runs or many small parts, propeller-type attachments should be used on the suction gun to ensure coating uniformity. Full production is best handled with propelleragitated pressure pot systems, as this provides the best application efficiency.
- NOTE: Handle BONDERITE® S-FN 109B as you would a quality automotive lacquer. AVOID DRY SPRAY, as this will cause poor adhesion. To reduce overspray, use the minimum atomization pressure required for adequate coverage.
- Print Application
- Product is supplied ready for use for printing applications. If dilution is necessary, use MEK or MIBK.
- Drying
- Air dry coated parts approximately 10 minutes, depending on humidity, before carrying out resistance checks. Drying time for production operations can be accelerated by passing the coated parts through infrared heat or through batch or conveyor ovens, at some increase in resistance.
- Surface Preparation:
- Method of Use
- Product Application :
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000218
- Principal
Storage & Handling
- Storage and Shelf Life Information
- Shelf life for this product is two years from date of qualification under original seal. Keep container tightly closed when not in use. Store in a cool, well ventilated area. Empty containers may retain hazardous properties.
Other
- Color
- Black
- Color (SDS)
- Black
- IATA/ICAO Proper Shipping Name
- Methyl isobutyl ketone
- IATA/ICAO UN Number
- UN 1245
- IMO/IMDG Proper Shipping Name
- Methyl isobutyl ketone
- IMO/IMDG UN Number
- UN 1245
- Item Number
- Odor (SDS)
- Alcohol
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT Proper Shipping Name
- Methyl isobutyl ketone
- USA/DOT UN Number
- UN1245
- Application Information
Value Units Test Method / Conditions Application Temperature max. 104.0 °C °C continuous - Material Composition
Value Units Test Method / Conditions Solid Content 40.0 % % of wet product Volatile Organic Compounds (VOC) 618.0 g/L g/L of wet product - Physical Properties
Value Units Test Method / Conditions Density 1.03 kg/L kg/L Flash Point 16.0 °C °C Storage Temperature 41.0-86.0 °F °F Viscosity 1800.0 mPa.s mPa.s of wet product - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 114.0 °C °C Flash Point (SDS) 16.0 °C °C Pensky-Martens Closed Cup (PMCC) Specific Gravity (SDS) 1.031 - Vapor Pressure (SDS) 14.5 mm Hg mm Hg at 20°C Viscosity (SDS) 800.0-3600.0 cPs cPs Volatile Organic Content (VOC) (SDS) 617.6 g/L g/L - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 yr yr