Products

Foral® 105 resin is the pentaerythritol ester of highly hydrogenated gum rosin. A pale thermoplastic resin, it offers advantages as a tackifier or modifier in various adhesive and coating compositions. Foral® 105 resin exhibits outstanding resistance to oxidation and to discoloration caused by heat and ageing. It has a substantially higher softening point than glycerol rosin esters, and is therefore recommended where a harder resin may be desirable.

MKOREZ® LP-9800S is a brown and liquid low molecular weight resin obtained from polymerizing unsaturated aromatic olefins/diolefins derived from thermal cracking of naphtha. The major applications are compounding agent for tires, rubber coated clothes, and etc.

Staybelite® Ester 10 is the glycerol ester of partially hydrogenated gum rosin. It is a pale, thermoplastic resin with excellent resistance to oxidation and discoloration. It is recommended for use as a tackifying resin for many adhesive applications, particularly pressure sensitive and emulsion types. In general, it is useful where there is need for pale, non-oxidizing, and color stable resin.

TEGO® VariPlus CA N shows excellent viscosity reduction and helps accelerate drying speed. It provides very good adhesion on metal combined with high gloss and good weather resistance.

POLYCO™ 2160 is Carboxylated Polyvinyl Acetate Homopolymer with excellent mechanical stability and very low grit levels. Medium particle size with good pigment binding ability and excellent water resistance. Minimizes "water interference mottle" in offset printing and offers good ink receptivity, glueability, and brightness with very low odor.

SharkDISPersion WX™ is a vinyl-based binder and resin used in paints and coatings.

DzBh Baling® YH-1126 is a linear styrene/isoprene block copolymer.

DURATRACK™ R-100 Emulsion is a specially designed all-acrylic resin for fast drying and high-performance traffic markings. The combination with DURATRACK™ AEH- 100 Acrylic-Epoxy Hybrid as a two-component waterborne coating system demonstrates to have excellent durability, aggregates retention, wear resistance and adhesion to road surfaces. In addition, it brings such benefits as long pot-life, ease of handling and application. The installation of DURATRACK™ coating system with equipment normally for typical waterborne traffic paint significantly reduces the total cost compared to other two-component coating systems. DURATRACK™ coating system is ideal for building high quality and large scale of green bike lane networks.

PLYAMUL® 305 is a binder and resin used in DIY & consumer, industrial, industrial & assembly adhesives, packaging & paper, and wood applications.

DzBh Baling® SEBS YH-602T is a radial hydrogenated styrene/butadiene block copolymer with excellent tensile strength and MFR.

Foral® 85 resin is a glycerol ester of hydrogentated gum rosin. It is an exceptionally pale, thermoplastic resin that has outstanding resistance to oxidation and to discoloration caused by heat and ageing. It can be used in a wide array of adhesive tackifier applications and in protective/barrier type coatings where light color and oxidation resistance are needed.

OREVAC® 18732 is a maleic anhydride grafted polypropylene.

Rilsan® ROTO 11 NATURAL is a binder and resin used in chemical manufacturing, functioning as a binder.

DERCOLYTE® A 125 is produced from the polymerisation of alpha pinene. It is a tackifying resin especially recommended to improve the adhesive properties (tack, adhesion) of hot melt formulations or solvent based adhesives.

PARALOID™ A-21LV 30% Resin is a very hard methyl methacrylate polymer with enhanced adhesion properties. It is supplied as a 30% solution in a toluene/MEK/butanol solvent system. The polymer is also available in solid grade form. PARALOID™ A-21LV 30% Resin is similar to PARALOID™ A-21LV 30% Resin in characteristics and uses but because of its solvent system, PARALOID™ A-21LV 30% Resin possesses better compatibility with cellulosics, such as nitrocellulose and cellulose acetate butyrate. PARALOID™ A-21LV 30% Resin also will allow a higher solids content at spray viscosity.