Products

D.E.R.® 3911A epoxy resin is a hybrid based on a bisphenol a based liquid epoxy resin and a urethane based resin.

FORTEGRA® 401 is a specialty polyoxypropylene diamine modified liquid epoxy resin. FORTEGRA® 401 is designed for the use of enhancing the toughness and flexibility for epoxy systems, mainly used in epoxy adhesives and coatings products. With improved toughness and flexibility, the adhesives products can achieve better drop resistance and impact peeling resistance, as well as perform well on aging tests. While for the applications in coatings, it brings the benefits of improved adhesion and impact resistance. A wide variety of curing agents are available to cure this resin at ambient conditions. Most frequently used curing agents are aliphatic polyamines, polyamides and modified versions of these. Elevated temperature cure is necessary and post-cure required to develop full end properties if anhydride or catalytic curing agents are employed.

D.E.N.® 438-EK85 is a solution of a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac in methyl ethyl ketone.

FORTEGRA® 501 was designed to provide toughening benefits to epoxy systems, mainly used adhesives and composites. The epoxy functionality enables the acrylic toughener to react into the thermoset. The thermal properties can be maintained for epoxy systems that have been toughened by the incorporation of FORTEGRA® 501. A wide variety of curing agents is available to cure this resin at ambient conditions. Most frequently used curing agents are polyamines, polyamides and modified versions of these. Elevated temperature cure is necessary and post-cure required to develop full end properties if anhydride or catalytic curing agents are employed.

SharkPellets C4C™ are produced from 100% recycled post-industrial polyvinyl butyral (PVB) film, collected as remainder obtained from the production of automotive windshields and laminated glass.

HIKOTACK® P-120P is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. This grade especially shows very good compatibility with polar polymer such as epoxy resin, alkyd resin and ethylene vinyl acetate (EVA), so the major usages are vehicles in the coating industry and tackifier for ethylene vinyl acetate (EVA) based hot melt adhesive (HMA).

AP 5805 is an undiluted clear bifunctional liquid epoxy resin produced from bisphenol A and epichlorohydrin.

HIKOTACK® P-90HS is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. HIKOTACK® P-90HS can be used as tackifier for Ethylene Vinyl Acetate (EVA) based hot melt adhesive (HMA), water repellent agent, concrete curing agent and binder for asphalt.

HIKOTACK® P-90 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. HIKOTACK® P-90 can be used as tackifier for Ethylene Vinyl Acetate (EVA) based hot melt adhesive (HMA), water repellent agent, concrete curing agent and binder for asphalt.

HIKOTACK® P-150 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are vehicle for ink. HIKOTACK® P-150 shows superior compatibility with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss.

D.E.N.® 431 is a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac.

D.E.N.® 439 is a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac.