Products

Dynasylan® 1124 is a secondary aminofunctional methoxy- silane possessing two symmetric silicon atoms. Dynasylan® 1124 acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier and can be used, for the chemical modification of substances. Dynasylan® 1124 is a colorless to yellow liquid with an amine-like odor, which is, for example, soluble in alcohols, aliphatic or aromatic hydrocarbons.

Coscat® 83 is an organobismuth compound that was specifically developed as a catalyst for two component, polyurethane systems. For soft to medium hardness systems the addition of a zinc catalyst can reduce a potential lag in final cure, yielding a stronger final cure typical of a mercury-based catalyst.

Cotin® 280 is a liquid organotin carboxylate catalyst recommended for use in room temperature vulcanised (RTV) silicone systems and polyurethane foams and elastomers. Cotin® 280 should be considered a “moderate to rapid” catalyst, for relatively faster cure. It does not utilize acetic acid in its manufacture, and therefore, does not have the odor or corrosiveness normally associated with organotin acetates. Cotin 280 should be used at an equal active weight basis as dibutyltin diacetate.

NGT 200 L is a low viscosity, light colour renewable natural phenolic compounds; it is a mono hydroxyl phenol having a long hydrocarbon chain at meta position which makes it a very versatile material having different uses.

Stabaxol® MB TPE 6030 is a 20.0 wt% active concentrate based on TPE-E. Hydrolysis stabilizer for TPE-E.

Dynasylan® HYDROSIL 1151 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 1151 is a colorless to slightly yellowish aqueous solution with an amine-like odur, miscible, with alcohols or water. Dynasylan® HYDROSIL 1151 contains about 40% active silane content in water.

AEROSIL® R 202 is a fumed silica surface-treated with polydimethylsiloxane with very good thickening properties.

AEROSIL® R 812 S Coating is a fumed silica after-treated with HMDS.