Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Product Code
- MITM12024
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Processing Information
Processing guidelines: Stabaxol® MB TPE 6030 is delivered in a ready-to-process condition (moisture content < 0.03 wt%). For achieving a lower moisture content the conditions according to polymer suppliers recommendations, but not higher than 100 °C (212 °F). Most suitable at 80 °C (176 °F) for 2 hours in dry-air dryers. Depends on hardness of the TPE-E and service conditions of the finished part.
Equipment: Stabaxol® MB TPE 6030 can be processed on regular extruders/injection molding machines suitable for thermoplastic urethan. Additionally needed equipment see Handling precautions. At processing temperatures traces of volatile matters can escape which have a temporary irritant effect on the skin, eyes and respiratory tracts. Adequate local ventilation should be provided at all places where Stabaxol® MB TPE 6030 containing products are exposed to temperatures of 230 °C (446 °F) or more. Direct contact with vapors formed by hot Stabaxol® MB TPE 6030 must be avoided.
Properties
Regulatory & Compliance
Technical Details & Test Data
- Formulation Recommendations
The input concentration depends on the hardness of the Stabaxol® MB TPE 6030 and the desired hydrolytic stability of the finished part. Normally the concentration is between 5 - 10 wt% to Hytrel. However the most suitable concentration should always be ascertained in preliminary trials.
Packaging & Availability
- Packaging Type
- Packaging Information
25 kg (55 lb) bags
Principal Information
- Group Principal Number
- S000008
- Principal
Storage & Handling
- Storage Conditions
In firmly closed original package Stabaxol® MB TPE 6030 has a storage life time of at least 24 months in dry and cool surroundings.
Other
- Appearance
- Free flowing yellowish cylindrical granules
- Appearance (SDS)
- Cylindrical granules
- Color (SDS)
- Yellow
- Flammable Nature (SDS)
- May form combustible dust concentrations in air
- Item Number
- USA/DOT UN Number
- Not Applicable
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 24.0 mo mo - Physical Properties
Value Units Test Method / Conditions Bulk Density 500.0-700.0 kg/m³ kg/m³ Density 1.2 g/cm³ g/cm³ At 20°C Moisture Content max. 0.03 %(W/W) %(W/W) - Material Composition
Value Units Test Method / Conditions Active Content 20.0 %(W/W) %(W/W) Hytrel Copolyester-Ester Content 80.0 %(W/W) %(W/W) - Application Information
Value Units Test Method / Conditions Application Temperature 180.0-250.0 °C °C Dosage (Use Level) 5.0-10.0 %(W/W) %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.1 g/cm³ g/cm³ at 20°C Melting Point (SDS) 150.0-200.0 °C °C