Products

ZINC OXIDE GRADE 500 is a brilliant white powder manufactured by the French (Indirect) Process. Grade 500 is a popular general use high quality lower lead (Pb) zinc oxide. Grade 500 meets GMP 21CFR110, is USFDA approved as GRAS (Generally Recognized As Safe) at 21cfr182.8991 and is authorized by the USFDA for use wherever GRAS is approved including food contact in rubber, plastics, and coatings. ZINC OXIDE GRADE 500 is also meets the requirements of ASTM specification D79, 2000/53/EC End of Life Vehicles (ELV Directive), 2002/95/EC Restriction of Hazardous Substances Directive (RoHS) for heavy metals and Waste Electrical and Electronic Directive (WEEE), and other regulations where high quality zinc oxide is required. The product is also available in pelleted form (grade 500P), and with around up to 0.1% processing aid/surface treatment (grade 500T) for some rubber mixers.

SOCER BRAZIL COL 1440 WW/X S Elliottii Rosin obtained by distillation of crude gum / pine oleoresin collected from Pinus trees (live).

ZINC OXIDE GRADE 104 is a brilliant white powder manufactured by the French (Indirect) Process. Grade 104 is our popular medium particle size zinc oxide offering high assay and very low impurities. Grade 104 is approved for pharmaceutical drug use as an excipient, is USFDA approved as GRAS (Generally Recognized As Safe) at 21cfr182.8991 and is authorized by the USFDA for use wherever GRAS is approved including food contact in rubber, plastics, and coatings. Grade 104 also meets the requirements of ASTM specification D79, 2002/95/EC Restriction of Hazardous Substances Directive (RoHS) for heavy metals and Waste Electrical and Electronic Directive (WEEE), and other regulations where high quality zinc oxide is required.This product is also available in pelleted form (grade 104P), and with around up to 0.1% processing aid/surface treatment (grade 104T) for some rubber mixers.

EBECRYL® PEG200DMA (polyethylene glycol di-methacrylate), CAS N° 25852-47-5, is a difunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® PEG200DMA forms homopolymers and copolymers. EBECRYL® PEG200DMA is compatible with a wide range of acrylated and methacrylated resins.

PTMEG-3000 is used in DIY consumer and industrial and assembly adhesives. It is compatible with polyamide, polyesters, and polyurethane substrates.

SOCER BRAZIL COL 1440 is 100% Elliottii Rosin obtained by distillllation of crude gum / pine oleoresin collected from Pinus trees (live).

PTMEG-2000 is used in DIY consumer and industrial and assembly adhesives. It is compatible with polyamide, polyesters, and polyurethane substrates.

TMPTA is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance.

PTMEG-1000 is used in industrial and assembly adhesives. It is compatible with polyamide, polyesters, and polyurethane substrates.

Zochem Grade 102T is a brilliant white powder manufactured by the French (Indirect) Process. Grade 102 offers high assay, very low impurities, and fine particle size with the highest French Process m2/g surface area (“SA”) available. Grade 102 replaces grades KADOX 911. Zochem Grade 102T is also available with processing aid/surface treatment.

ZOCO 104 is a medium particle size, high purity, zinc oxide excellent for applications where low surface area reactivit intermediate to ZOCO 103 and ZOCO 100 is required

PTMEG-650 is used in industrial and assembly adhesives and is compatible with polyamide, polyesters, and polyurethane substrates.

Polycin® 12 BIO is a 100% solids castor oil based polyol. It is a tetra-hydroxy ester, with primary and secondary hydroxyl groups, capable of producing high strength polyurethane compositions. Stringent processing techniques make this derivative appropriate for medical sealant and coating applications.

CARPOL® GP-6305-55 Polyol is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6300 Da. This triol is polymerized with propylene oxide and then capped with 5% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, CARPOL® GP-6305-55 Polyol may also be included as a component in other urethane products and formulations.

CARPOL® GP-700 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E. and flexible foam, however, CARPOL® GP-700 may also be included as a component in other urethane products and formulations.