Products

Calcinate® C-400CLR is a 400 TBN overbased calcium sulfonate. This highly overbased calcium sulfonate is engineered to have the alkaline component as all calcium carbonate. This product is used as a component in metal working fluids where the unique lubricity and extreme pressure properties of calcium carbonate are utilized. The calcium to sulfonate ratio is optimized for good oil solubility and compatibility with other formulating components. Calcinate® C-400CLR is compatible with most mineral base oils, white oils, and synthetic base stocks.

Focus InhibitR 1000 is a high performance, water-soluble corrosion inhibitor for cast iron and steel alloys. It is formulated using a unique mixture of organic acid salts. Focus InhibitR 1000 is very low foaming and has excellent hard water stability. This product does not contain any nitrates/nitrites, boron, or secondary amines.

Calcinate® OR is a 400 TBN first intent overbased calcium sulfonate. This product is a high quality sulfonate designed to be a component in metal working formulations providing the beneficial effects of alkalinity for neutralizing acid and superior demulsibility for rust inhibition. It also directly protects the metal surface from corrosion. The calcium to sulfonate ratio is optimized for good oil solubility and compatibility with other formulating components. Calcinate® OR is compatible with most mineral base oils, white oils, and synthetic base stocks.

BLUESIL FLD 47V5-V10 are low viscosity polydimethylsiloxanic fluids.

NYONOL™ LP-385 is a water insoluble polyalkene glycol (PAG). It is a clear liquid at room temperature with a low vapor pressure. NYONOL™ LP-385 exhibits excellent lubricity and can be used in various industrial lubricating applications.

NYONOL™ LP-135 is a water insoluble polyalkene glycol (PAG). It is a clear liquid at room temperature with a low vapor pressure. NYONOL™ LP-135 exhibits excellent lubricity and can be used in various industrial lubricating applications.

NYONOL™ LP-165 is a water insoluble polyalkene glycol (PAG). It is a clear liquid at room temperature with a low vapor pressure. NYONOL™ LP-165 exhibits excellent lubricity and can be used in various industrial lubricating applications.

Additin® RC 5801 is used where corrosion and release of copper and cobalt, including their alloys, needs to be avoided. Additin® RC 5801 is clearly soluble in water (max. 1 %) and can be applied in aqueous systems with a pH-value > 7. A further area of application are greases.

PC-1844™ Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It provides improved high temperature performance, and improved efficiency. PC-1844™ Defoamer is recommended for high performance usage where PC-1244, PC-1644, or silicone defoamers do not give adequate performance. These usages include gear oils, specialty lubricants, shock absorber, hydraulic, turbine and transmission oils. Typical use levels of the defoamer solutions range from 50 - 500 ppm (20 - 200 ppm active polymer). The optimum level is dependent upon the nature of the oil, and it is therefore necessary to run a concentration profile on each oil. PC-1844™ Defoamer defoamer is most typically employed at 200 - 250 ppm of solution (80 - 100 ppm active polymer). PC-1844 is without addition of silicon.