Preventol® IT 14

It is a violation of Federal law to use this  Preventol® IT 14 in a manner inconsistent with its labeling.

** For detailed dosage instructions see Preventol® IT 14 Preservative EPA Label

For the use in the preparation of stabilized isothiazolinone-based biocidal products.

• Preventol® IT 14 Preservative is a microbicide containing a mixture of (14 % active) isothiazolinones.
• Preventole IT 14 Preservative has a broad specturm of activity, is water soluble and compatible with most raw materials.
• Preventol® IT 14 Preservative will not adversely affect product physical properties or performance and should not impart odor or color to most final products.
• Preventol® IT 14 Preservative can be incorporated at any stage of the production process but is best added in the initial stage.
• However, if higher temperatures (>104 °F / >40 C) or pH values >9 are likely to occur during the manufacturing process, the product should be added at the end of the process or to the finished product. In this case take care to distribute the preservative uniformly in order to ensure homogeneous mixture of the product in the water. Since the Preventole IT 14 Preservative has a low viscosity, the product can be added directly or pre-dissolved in water.
• Preservation Preventole IT 14 Preservative provides broad-spectrum microorganism control in water-based systems. Preventol® IT 14 Preservative is non-foaming, water-based product that is readily biodegradable after appropriate dilution.
• Water Treatment Preventole IT 14 Preservative is effective against bacteria that cause fouling and corrosion in industrial cooling water systems. Not only is Preventol® IT 14 Preservative effective in controlling planktonic organisms, but the product will also aid in the control. Use of the appropriate level of biocide in the water system can help to maintain a sufficient water flow rate and heat exchange by reducing the microbial load in the system.
• Slime Prevention Preventol® IT 14 Preservative is a broad spectrum bactericide including efficacy against slime forming bacteria. Slime forming bacteria are a major concern in industrial water systems because they can help with the formation of biofilms. The biocide can be added directly to the primary circuit, the machine chest or the headbox. If the system is extremely fouled, it is recommended that a shock treatment followed by a continuous at a lower dose rate. (See Direction for Use section for dosage levels) Badly fouled water systems should be cleaned prior to biocide treatment.
• To obtain reliable and reproducible results, homogeneous distribution in the materials to be protected must be ensured by taking suitable measures in production (stirring, agitating, etc.).
• As with any product, the use of this product must be tested (including field testing) prior to incorporating into finished product.

• Preventol® IT 14 should be stored in the original sealed package.
• Since Preventol® IT 14 Preservative is an aqueous solution, appropriate measures should be taken to ensure temperature does not exceed 104° F / 40 °C and does not freeze during the transport and storage.