Products

TEGO® DISPers 1010 is a polymeric wetting and dispersing additive used todispersepigments in solventsof low polarity, like whitespirits. Especiallyin low polar solvents, itsoutstanding viscosityreduction can beobserved.

TEGO® DISPers 651 is a waterborne wetting and dispersing additive specifically used for the production of universal colorants for decorative coatings. Wets and stabilizes inorganic and organic pigments. Can be used for a whole colorant line. Anionic and solvent-free.

CRAYVALLAC® SUPER is a high performance, micronised amide wax rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. CRAYVALLAC® SUPER overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body. Consequently, coatings formulated using CRAYVALLAC® SUPER exhibit an enhanced performance such as controlled flow behavior, ease of application and excellent sag resistanceIts smooth viscosity recovery will help to achieve high film thickness without compromising a good levelling.

TEGO® DISPers 760 W is a non-ionic wetting and dispersing additive with focuson pigment wetting.Showsoutstanding color strength development and viscosity reduction when used as a co-dispersant. With carbon blacks, it provides high pigment loadings,high jetness, and long-term stability.

TEGO® DISPers 685 is a high polymeric wetting and dispersing additive for radiation-curing and solventborne formulations.Stabilizes all kindsof pigments, especially organic pigments and carbon blacks. 100% active and liquid, therefore suitable for 100% solids and high solids formulations.

AP4406L is a modified aliphatic amine hardener used with liquid epoxy resin based systems at ambient as well as low temperature.

TEGO® DISPers 755 W is a slightly anionic,polymeric high-performance wetting and dispersing additive for waterborne formulations.Suitable for all kindsof pigments. With organic pigments, the outstanding stabilization and viscosity reduction can be observed. Low influence on coating properties, therefore suitable for exterior applications in industrial and transportation coating.Solvent-free.

TEGO® DISPers 705 is a wetting and dispersing additive for solvent borne formulations. Stabilitzes inorganic pigments, fillers and bentonites. Can be used to produce very stable and easy to handle pastes of bentonites.

AP 5980 is low viscosity modified cyclo-aliphatic amine adducts hardener for epoxy resin based coatings. It exhibits high chemical resistance.

RHOPLEX® I-2183N is a modified aqueous acrylic polymer offering excellent heat resistance properties as an overprint varnish and a general ink letdown vehicle. It is a hard film former that offers excellent heat resistance without the use of zinc or zirconium additives. In fact zinc compounds should not be used as they will detract from performance. On press, RHOPLEX I-2183N has excellent transfer and printability with good resolubility for ease of clean up.

RHOPLEX® I-545 is a versatile all-acrylic aqueous vehicle suitable for overprint varnishes and letdowns for flexographic and gravure ink applications. It is a hard film former that offers a distinct combination of properties - good gloss, heat resistance and water resistance with fast drying speed. On press, RHOPLEX® I-545 has excellent transfer and printability with good resolubility for ease of clean-up.

TEGO® DISPers 652 is a wetting and dispersing additive for inorganic pigments. Can be used in direct grinds of solventborne and radiation-curing formulations to reduce the viscosity. As a co-additive in universal colorants, it acts as a compatibilizer.

AP 5608 is a low viscosity modified Cyclo-aliphatic amine adducts hardener for epoxy resin based coatings. The coating made from AP 5608 has very high gloss.

TEGO® DISPers 678 is a polymeric wetting and dispersing additive for solventborne formulations. Providesoutstanding long-term stability especially for formulations with mixed pigmentation.Stabilizes all kindsof pigments and reduces floatation.Excellent viscosity reduction makes it very suitable for 2- pack high solids formulations.

AP 5726 is a modified cycloaliphatic amine adduct hardener for epoxy resin based lacquers and coatings.