AP 5608

AP 5608 is a low viscosity modified Cyclo-aliphatic amine adducts hardener for epoxy resin based coatings. The coating made from AP 5608 has very high gloss.

Principal: Admark Polycoats PVT LTD

Functions: Curing Agent, Hardener, Hardener

Chemical Family: Chemical Mixtures & Blends

End Uses: Floor Coatings, Floor Screeds, Protective Coatings, Solventless & High Solids Coating, Tank Lining, Tile Grout

Features: Chemical Resistance, Exudation Resistant, Good Blush Resistance, High Gloss, Low Temperature-Curing, Low Viscosity, Low Viscosity

Physical Form: Liquid

  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

Features & Benefits

CASE Ingredients Features
Industrial Additives Features
Key Features
  • Suitable for ambient and low temperature cure, down to 10 °C.
  • Low viscosity and high gloss finish.
  • Better chemical resistance compares to Cycloaliphatic amine curing agents.
  • Resistant to blush and exudation.

Applications & Uses

Coating End Applications
Industrial Additives End Use
Markets
Applications
Product Applications
  • It is used in combination with liquid Epoxy resins Suitable for high solid or solvent free industrial protective coatings. Ideal for chemical resistance high gloss floor coatings and screed flooring. Can be use for tank linings and tile grouts.

Properties

Physical Form

Regulatory & Compliance

Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?

Safety & Health

Handling Precautions

The hardener will absorb moisture and carbon dioxide when left in open containers. This may result in increased viscosity and sometimes crystallization. Use personal protective equipments and follow industrial hygienic procedures. Recommended to use safety glasses, protective clothing, gloves, & masks suitable for chemical and solvents & their vapor.

Packaging & Availability

Packaging Type

Principal Information

Group Principal Number
S001795
Principal

Storage & Handling

Storage Conditions
  • AP 5608 should be stored in a dry place, preferably in the sealed original container at temperatures 15 to 30 °C. The Product should not be stored exposed to direct sunlight.
  • Shelf life: (15 to 30 °C): 12 Month.
  • Hazardous decomposition products: (When in fire) Carbon monoxide, Carbon dioxide. Nitrogen Oxides and other toxic Gases & Vapors.

Other

Appearance
Clear straw colored liquid
Appearance (SDS)
Clear
Color (SDS)
Colorless
IATA/ICAO Proper Shipping Name
Amines, liquid, corrosive, N.O.S.
IATA/ICAO UN Number
UN2735
IMO/IMDG EmS Fire
F-A
IMO/IMDG EmS Spill
S-B
IMO/IMDG Proper Shipping Name
Amines, liquid, corrosive, N.O.S.
IMO/IMDG Segregation Group
SGG18, SG35
IMO/IMDG UN Number
UN2735
Insoluble in (SDS)
Water
Item Number
Odor
Amine
Odor (SDS)
Amine - like
USA/DOT Emergency Response Guide Number
153
USA/DOT Proper Shipping Name
Polyamines, liquid, corrosive, N.O.S.
USA/DOT UN Number
UN2735
Optical Properties
ValueUnitsTest Method / Conditions
Color Scalemax. 2.0 GardnerGardner
Color Scalemax. 2.0 ASTMASTMASTM D1544
Chemical Properties
ValueUnitsTest Method / Conditions
Amine Value250.0-270.0 mg KOH/gmg KOH/gISO 9702
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life12.0 momo
Physical Properties
ValueUnitsTest Method / Conditions
Density1.02-1.05 kg/Lkg/LASTM D1475 at 25°C
Gelling Time45.0 mmat 25°C, 150g
Viscosity500.0-700.0 mPa.smPa.sDIN 53015 at 25°C
Viscosity500.0-700.0 mPa.smPa.sISO 12058 at 25°C
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Density (SDS)1.02-1.05 g/cm³g/cm³ASTM D1475 at 25°C
Flash Point (SDS)min. 93.0 °C°C
Viscosity (SDS)500.0-700.0 mPa.smPa.sDIN 53015 at 25°C
Viscosity (SDS)500.0-700.0 mPa.smPa.sISO 12058 at 25°C