Products

Protectosil® WS 670 is aqueous emulsion based on organofunctional silanes for the water repellent impregnation of porous, mineral substrates.

D.E.H.® 804 is an amine curing agent dissolved in water and designed to emulsify epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol. D.E.H.® 804 is an amine curing agent dissolved in water and designed to emulsify epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol. Benefits D.E.H. 804 serves as a curing agent for self-leveling floorings. When cured with D.E.R. 3221 above a D.E.H. 805 based primer, D.E.H.® 804 did not contribute to significant emissions, such that the full flooring system could pass the AgBB evaluation scheme and get labeled A+ according to the French labeling of construction products evaluation scheme. D.E.H.® 804 is also suitable for the development of flooring on green concrete or where water is expected to migrate from the substrate.

D.E.R.® 3401 is a low viscosity rapidly reacting bisphenol a/f epoxy resin designed for fast-curing coatings, adhesives, and mortars.

Protectosil® WS 602 is an aqueous emulsion for the water repellent treatment of mineral porous materials, especially facades. Essentially VOC free.

Protectosil® SC CONCENTRATE is suited for an easy to clean reatment of many mineral substrates.

Protectosil® WB CONCENTRATE is a clear, penetrating, breathable water repellent for use on brick, concrete masonry units and some natural stones. A 100% concentrated alkyltrialkoxysilane which is intended to be diluted with water and provides the high performance traditionally associated with alcohol carried systems. Prevents water and waterborne contaminants from entering the substrate and causing premature deterioration. Protectosil® WB CONCENTRATE is especially suited for imparling water repellency to substrates such as brick masonry and split-face block. By preventing water and waterborne contaminants from entering the substrate, Protectosil® WB CONCENTRATE reduces such problems as efflorescence, leaching, acid rain deterioration, scaling, dirt buildup, staining and corrosion of reinforcing steel. Treated surfaces are fully breathable because the natural moisture vapor transmission is not affected. This will eliminate problems caused by entrapped moisture, including blushing of the sealer and freeze-thaw damage to the masonry.

D.E.H.® 598B is used as a curing agent for epoxy resins for rapid-set and low temperatures cure systems with high gloss and high strength. It results in a non-blushing product and has good water spot resistance and excellent chemical resistance. It can also be used as an accelerator for other hardeners in coatings and civil engineering applications.

D.E.H.® 622 is an modified amine curing agent for epoxy resins.

D.E.R.® 721 is an aliphatic liquid epoxy resin based on a reaction product of epichlorohydrin and C12-C14 alcohol.

D.E.H.® 545 hardener is a low viscosity formulated polyamidoamine adduct specially designed for wet application areas. It may be formulated with liquid Bisphenol A and/or Bisphenol F epoxy resins for optimum adhesion on dry and wet concrete substrates. D.E.R.® 353 and D.E.R.® 324 are recommended epoxy resins for use with D.E.H.® 545 as a starting formulation of primer systems.

D.E.R.® 330 liquid epoxy resin is a reaction product of epichlorohydrin and Bisphenol A.

AP 5726 is a modified cycloaliphatic amine adduct hardener for epoxy resin based lacquers and coatings.

Protectosil® WS 808 is an oligomeric propyl siliconate/silicate concentrate as water-repellent and consolidant for mineral substrates.

D.E.R.® 732 Liquid Epoxy Resin is a reaction product of epichlorohydrin and polypropylene glycol.

Dynasylan® SILBOND® HT-30 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from ₂9.5% to 31.0% (as SiO₂). This material is formulated for use in precision investment casting applications. Advantages include high green-strength and excellent performance in high-temperature casting applications. The improved green-strength is a direct result of the higher SiO₂ content.